Re: EIGRP Flapping using DMVPN/GRE.

Thank you so much Roy.

This is really a great work of INE.

Best Regards.
______________________
Adil

On May 18, 2011, at 6:19 AM, Roy Khan wrote:

> Hi
>
>
> check this it will help you
>
> http://blog.internetworkexpert.com/2008/08/02/dmvpn-explained/
>
>
>
> > Date: Wed, 18 May 2011 17:16:43 +1000
> > Subject: Re: EIGRP Flapping using DMVPN/GRE.
> > From: pbhatkoti_at_gmail.com
> > To: aspasha_at_gmail.com
> > CC: jbiggs_at_usaid.gov; ccielab_at_groupstudy.com
> >
> > I can almost gaurantee you, this is not your issue.
> > You've one hub and one spoke and these parameter you've mentioned make no
> > difference!
> > only when it's Spoke2spoke communication then these parameters triggers!
> >
> > Just labbed it up.
> >
> > U might be hitting some kind of bug, check your IOS version with
bugtoolkit.
> >
> >
> > On Wed, May 18, 2011 at 12:43 PM, Adil Pasha <aspasha_at_gmail.com> wrote:
> >
> > > Thanks everyone for your response and suggestions.
> > >
> > > What I found is the following 2 commands were missing on the spokes.
> > >
> > > no ip split horizon eigrp 2
> > > no ip next-hop-self eigrp 2
> > >
> > >
> > > Best Regards.
> > > ______________________
> > > Adil
> > >
> > > On May 16, 2011, at 2:56 PM, Biggs, Jeff wrote:
> > >
> > > > What code are you running and platform? We have over 80 spokes and 3
> > > hubs
> > > with no issues and have been running it for 3+ years.
> > > >
> > > > JB
> > > >
> > > > On Sun, May 15, 2011 at 2:32 PM, Adil Pasha <aspasha_at_gmail.com>
wrote:
> > > > Does anyone know why EIGRP starts flapping when it is used with
DMVPN/
> > > GRE?
> > > >
> > > > It is so annoying and painful. I have to remove the tunn interface
and
> > > paste
> > > it back in. It works for a while and then drops again.
> > > >
> > > > Is there a bug issue?
> > > >
> > > > Thanks in advance.
> > > >
> > > > Adil.
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
Received on Wed May 18 2011 - 10:00:48 ART