Re: nssa no-redistribute command

hope this helps.. Let me know if u need more explanation.. I try my best
to explain.

mohan.

On Sat, May 14, 2011 at 8:59 AM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> Hey team,
>
> I was doing a practice lab today and the lab gave me this task:
>
> - Do not allow any external or inter area OSPF routing information to
> enter
> Area 26 from R1. Do not use any prefix-based filtering techniques.
>
> - I then read ahead in the OSPF config section and saw that I was later
> going to have to redistribute a Loopback into this area. So I knew the
> answer (or thought I knew)
>
> Ok "area 26 nssa no summary" - should be easy points right?
>
> I got the section wrong because the solution was looking for "area 26 nssa
> no-redistribute no-summary"
>
> I have read about the no-redistribute option, but am a little confused
> still. To me, I do not see the difference adding this "no-redistribute"
> option makes.
>
> I am going to lab this up in for the next 1/2 hour or so and wondered if
> anyone had any input, suggestions, etc...
>
> Have a good night team,
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun May 15 2011 - 12:08:57 ART