RE: preferring one route over the other

>R1 and R2 send 0/0 to R3 via default info-orig

>I want R3 to prefer R2's def route.

>How would you suggest I do this?

As you stated R3 is OSPF neighbored with R1/R2 you can

You can do any of these to effect which default route R3 chooses (towards R2 over R1)

1. Set the metric on R1's to higher than the default (20)

2. Set the metric on R2's to LOWER than the default (20)

3. Set metric type to E1 on R2's redistribution (E1 is preferred over E2)

I'm sure there are other ways...

-Joe

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Aaron
Sent: Monday, May 16, 2011 10:39 AM
To: 'Cisco certification'
Subject: preferring one route over the other

I have 3 routers..

R1 and R2 both have internet connections and learn 0/0 via bgp from upstream
isp

R3 connects and ospf neighbors with R1 and R2 over a single vlan. R1 and R2
send 0/0 to R3 via default info-orig

R3 learns dual def route (2) 0/0's...equal cost, and thus adds (2) 0/0's to
routing table

I want to now change this

I want R3 to prefer one of those 0/0's over the over 0/0

I want R3 to prefer R2's def route.

How would you suggest I do this?

Aaron

Blogs and organic groups at http://www.ccie.net
Received on Mon May 16 2011 - 16:00:26 ART