Re: nssa no-redistribute command

I guess it will stop type 7 routes ( external routes) . Using NSSA will filter all inter area routes only .

Best regards,

Yaser Al Yousif

"Even a stopped clock is correct twice a day

On May 14, 2011, at 6:29 AM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> Hey team,
>
> I was doing a practice lab today and the lab gave me this task:
>
> - Do not allow any external or inter area OSPF routing information to enter
> Area 26 from R1. Do not use any prefix-based filtering techniques.
>
> - I then read ahead in the OSPF config section and saw that I was later
> going to have to redistribute a Loopback into this area. So I knew the
> answer (or thought I knew)
>
> Ok "area 26 nssa no summary" - should be easy points right?
>
> I got the section wrong because the solution was looking for "area 26 nssa
> no-redistribute no-summary"
>
> I have read about the no-redistribute option, but am a little confused
> still. To me, I do not see the difference adding this "no-redistribute"
> option makes.
>
> I am going to lab this up in for the next 1/2 hour or so and wondered if
> anyone had any input, suggestions, etc...
>
> Have a good night team,
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat May 14 2011 - 06:58:19 ART