Re: Unable to bring the LDP neigborship

What do "show" and "debug" commands display? Are you running IGP or
iBGP between them? What are your MPLS LDP router IDs? Are they
reachable between the routers?

--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: markom_at_ipexpert.com
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Fri, Apr 29, 2011 at 09:20, Naufal Jamal <naufalccie_at_yahoo.in> wrote:
> Hi ,
>
> I am trying this in GNS3 with 3745 . I dont know why the LDP neigborship is
> not coming up between R1 and R2
>
> R1 config
> interface FastEthernet0/1
> B ip address 3.3.3.2 255.255.255.0
> B duplex auto
> B speed auto
> B mpls label protocol ldp
> B mpls ip
> end
>
> mpls label protocol ldp
> mpls ldp discovery hello interval 2
>
> R2 Config
> mpls label protocol ldp
> mpls ldp discovery hello interval 2
>
> interface FastEthernet0/0
> B ip address 3.3.3.1 255.255.255.0
> B duplex auto
> B speed auto
> B mpls label protocol ldp
> B mpls ip
>
> Ibgp running between them is up and running.
>
> Can anyone suggest?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net