Re: Eigrp leak-map statement with summarization - Multipoint

Thanks for the clarification, Narbik. Great response and explaination.
 
 
Regards,
Jay McMickle- CCNP, CCSP, CCDP, MCSE
http://mycciepursuit.wordpress.com/

________________________________
From: Narbik Kocharians <narbikk_at_gmail.com>
To: Jay McMickle
<jay.mcmickle_at_yahoo.com>
Cc: Manouchehr Omari <manouchehr1979_at_gmail.com>;
Jules Eyabane
<jep7619_at_gmail.com>; Cisco certification
<ccielab_at_groupstudy.com>
Sent: Sun, April 17, 2011 12:30:36 PM
Subject: Re:
Eigrp leak-map statement with summarization - Multipoint vs. P2P
subinterface
Actually it's stated in the DOCCD, that the "Leak-map" is not an option under
sub-interfaces. So as Manucher stated, if you are forced to use one on the
DLCI,
then, you have to run PPP and once you run PPP, the "Leak-map" option
shows up
under the virtual-templete. So P2P, and Multipoint (Using
subinterfaces) are
effected.

 
On Sun, Apr 17, 2011 at 9:02 AM, Jay
McMickle <jay.mcmickle_at_yahoo.com> wrote:

Thanks for the info!
>
>
>Regards,
>Jay McMickle- CCNP,CCSP,CCDP
>Sent from my iPhone
>http://mycciepursuit.wordpress.com/
>
>
>On Apr 17, 2011, at 10:38 AM,
Manouchehr Omari <manouchehr1979_at_gmail.com>
>wrote:
>
>
>>
>>
>> You will not
have the leak-map option under the sub-interface only. You can
>apply under
the virtual-template and bound to sub-interface.
>>
>> Kind Regards,
>> Manny
>>
>>
>> On Sun, Apr 17, 2011 at 11:03 AM, Jay McMickle
<jay.mcmickle_at_yahoo.com>
>wrote:
>> Is the Serial interface configured for
EIGRP? I've never noticed the P2P
>restriction.
>>
>> Regards,
>> Jay
McMickle- CCNP,CCSP,CCDP
>> Sent from my iPhone
>>
http://mycciepursuit.wordpress.com
>>
>>
>> On Apr 17, 2011, at 9:53 AM, Jules
Eyabane <jep7619_at_gmail.com> wrote:
>>
>> > Hi.
>> > quick question on some
options i see when i query for help in IOS:
>> >
>> > if i issue the following
config under a serial interface, i get the
>option
>> > for leak-map, but when
i issue it under a p2p, i get no such option. is
>the
>> > leak-map restricted
to the point to point interface only?
>> >
>> > ip summary-address eigrp 100
0.0.0.0 0.0.0.0 5 ?
>> > leak-map Allow dynamic prefixes based on the
leak-map
>> >
>> >
>> > Thanks
>> >
>> > Jep.
>> >
>> >
>> > Blogs and organic
groups at http://www.ccie.net/
>> >
>> >
Received on Sun Apr 17 2011 - 19:27:47 ART