Re: Eigrp leak-map statement with summarization - Multipoint

interesting find, i didnt see anything about a restriction but it is any
sub-interface on my router (C3725-ADVENTERPRISEK9-M), Version 12.4(15)T12

i wonder what would be the point of this restriction at the sub interface
level?

Router(config)#int s0/0
Router(config-if)#ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  leak-map Allow dynamic prefixes based on the leak-map
  <cr>

Router(config)#int s0/0.1
Router(config-subif)# ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  <cr>

Router(config-subif)#int f0/0
Router(config-if)#ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  leak-map Allow dynamic prefixes based on the leak-map
  <cr>

Router(config-if)#int f0/0.1
Router(config-subif)#ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  <cr>

Router(config-subif)#int s0/0
Router(config-if)#encapsulation frame-relay
Router(config-if)#ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  leak-map Allow dynamic prefixes based on the leak-map
  <cr>

Router(config)#int s0/0.1 point-to-point
Router(config-subif)# ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  <cr>

Router(config)#int s0/0.10 multipoint
Router(config-subif)# ip summary-address eigrp 1 1.1.1.1 0.0.0.0 ?
  <1-255> Administrative distance
  <cr>

--
Garry L. Baker
"With sufficient thrust, pigs fly just fine..." - RFC 1925
On Sun, Apr 17, 2011 at 6:03 PM, Jay McMickle <jay.mcmickle_at_yahoo.com>wrote:
> Is the Serial interface configured for EIGRP? I've never noticed the P2P
> restriction.
>
> Regards,
> Jay McMickle- CCNP,CCSP,CCDP
> Sent from my iPhone
> http://mycciepursuit.wordpress.com
>
>
> On Apr 17, 2011, at 9:53 AM, Jules Eyabane <jep7619_at_gmail.com> wrote:
>
> > Hi.
> > quick question on some options i see when i query for help in IOS:
> >
> > if i issue the following config under a serial interface, i get the
> option
> > for leak-map, but when i issue it under a p2p, i get no such option. is
> the
> > leak-map restricted to the point to point interface only?
> >
> > ip summary-address eigrp 100 0.0.0.0 0.0.0.0 5 ?
> >  leak-map  Allow dynamic prefixes based on the leak-map
> >
> >
> > Thanks
> >
> > Jep.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net