Dears,
I am facing issue in collecting netflow traffic from Cisco 1841 Router. IOS
(C1841-IPBASE-M), Version 12.4(3i). The data from Out Traffic is not being
displayed.
The Router is Data link to 10 branch offices. The connectivity is with EIGRP
and static routes. The netflow analyzer is "Manageine Netflow Analyzer"
version 8.6.
Below are the configuration for the reference where two branches interfaces
f0/0.1 and f0/0.2 are linked to branches. F0/1 is the local interface.
Regards,
Shahid
----------------------------------------------------------------
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
ip flow-cache timeout active 1
!
!
!
!
interface FastEthernet0/0
no ip address
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip route-cache flow
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/0.1
encapsulation dot1Q 100
ip address 172.16.100.2 255.255.255.252
no snmp trap link-status
!
interface FastEthernet0/0.2
bandwidth 512
encapsulation dot1Q 10
ip address 10.10.20.1 255.255.255.252
no snmp trap link-status
!
!
interface FastEthernet0/1
ip address 10.10.1.5 255.255.255.0
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip route-cache flow
load-interval 30
duplex auto
speed auto
no keepalive
ip classless
ip flow-export source FastEthernet0/0
ip flow-export version 5
ip flow-export destination 10.10.1.88 9996
!
ip http server
!
snmp-server ifindex persist
!
control-plane
Regards,
Shahid Mushtaq
IT Department
Hassan Abul Co.
Mobile: +965-66167380
Phone: +965-22624466 - Ext: 503
Fax: +965-22633111
www.hassanabul.com
Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 16 2011 - 13:39:21 ART
This archive was generated by hypermail 2.2.0 : Fri Apr 01 2011 - 06:35:41 ART