Re: Two ISP loadbalancing without BGP

Wondering if this would help...

1. enable
2. configure terminal
3. access-list access-list-number {deny | permit} source [source-wildcard]
[log]
4. route-map map-tag
5. set ip next-hop ip-address
6. set ip next-hop {ip-address [...ip-address] | recursive ip-address}
7. match ip address access-list-number
8. end

http://www.cisco.com/en/US/docs/ios/iproute_pi/configuration/guide/iri_prb_re
c_next_hop_ps6441_TSD_Products_Configuration_Guide_Chapter.html

Aaron

On Mar 15, 2011, at 1:30 AM, masroor ali <masror.ali_at_gmail.com> wrote:

> Hi,
>
> I have two internet connections terminating on same router, I want to do
> some source based routing, e.g
>
> 192.168.1.0/24 use ISP-01
> 192.168.2.0/24 use ISP-02
>
> please help me configuring this router.
>
> Note: Nat is not required over here.
>
>
> Thanks & Regards,
> Masroor Ali
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 15 2011 - 06:39:43 ART