Re: IPSLA

If you're doing this on GNS3 this can happen just due to latency in the
software.

On 3/5/2011 10:08 PM, Raghav Bhargava wrote:
> Hey Experts,
>
> Can someone advise some troubleshooting steps in IPSLA. Below is the output
> that i am getting. My Number of successes/failures are almost equal. My
> configuration is
>
>
> ****************************************
>
> ip sla 1
> icmp-echo x.x.x.x source-interface Loopback0
> frequency 5
> ip sla schedule 1 life forever start-time now
>
> labbr1#show ip sla statistics
> IPSLAs Latest Operation Statistics
>
> IPSLA operation id: 1
> Type of operation: icmp-echo
> Latest RTT: 1 milliseconds
> Latest operation start time: 19:01:11.526 PST Sat Mar 5 2011
> Latest operation return code: OK
> *Number of successes: 79
> Number of failures: 78*
> Operation time to live: Forever
>
> *****************************************
>
>

-- 
Chris Proctor
--
This message was scanned by ESVA and is believed to be clean.
Blogs and organic groups at http://www.ccie.net