RE: Vlan to Vlan : L2TPV3 question

Hi Gaurav,
         What you are trying to do is vlan rewrite feature.
You need to add following command to make it work.
#remote-id <>

This command will go under xconnect. Will be supported in 12.4 only , if
I am not wrong.

Regards,

Manu Ohri

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
GAURAV MADAN
Sent: Friday, March 04, 2011 10:00 AM
To: Cisco certification
Subject: Vlan to Vlan : L2TPV3 question

CE1 e0/0.201 ------ e0/0.201 PE -----IP CLOUD ----- PE e1/0.140
-----e1/0.140 CE2

PE1
====
int e0/0.201
encap dot1q 201
xconnect 10.1.1.1 33 pw-class TEST
!

PE2
=====
int e1/0.140
encap dot1q 140
xconnect 20.1.1.1 33 pw-class TEST
!

We are connecting CE1(201 vlan) to CE2 (140 vlan )

Q 1 : When vlan tagged pkt of 201 reaches PE1 .. Is this dot1q label
preserved / striped in above config .. There are 2 labels added i
know ( VC label and IGP/MPLS label ) .. But is original label from CE
preserved ?

Q 2 : How is it changed / re-written at PE2 ? Kindly explain

I think things will start making sense if these 2 questions are answered
.

Thanks in advance
Gaurav Madan

Blogs and organic groups at http://www.ccie.net
Received on Fri Mar 04 2011 - 10:10:34 ART