Re: BGP hold timer expired

Hi Raghav,

What version of code are you running? It could be CSCsI90250.

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl90250

Also, I noticed that you are using ip tcp adjust-mss 1400 your IPSec
tunnels. Is this where the BGP peering is happening? Also, what MTU did you
set for the tunnel interface?

HTH
Thomas

On Tue, Mar 1, 2011 at 5:28 AM, Abraham, Tharak <tharakabraham_at_gmail.com>wrote:

> Raghav,
>
> Any drops within the Provider ?
> Is it a pt to pt tunnel or Dmvpn ?
>
> Check your PM stats or request the same from the SP.
>
> Cant rule out possibility of a particular bug , if you are running an old
> IOS.
>
> Tharak Abraham Luke
>
>
> On Tue, Mar 1, 2011 at 1:15 PM, Raghav Bhargava
> <raghavbhargava12_at_gmail.com>wrote:
>
> > Hey Experts
> >
> > I have been seeing this issue lately on my cisco 3945's. I have tried
> > reading lots of docs but couldn't figure out a perfect solution for this
> > problem. The issue is that on my ipsec tunnel, my bgp session drops. When
> i
> > see the logs i see this message:
> >
> >
> >
> *******************************************************************************************
> >
> > Feb 15 03:53:38 PST: %BGP-3-BGP_NO_REMOTE_READ: x.x.x.x connection timed
> > out
> > - has not accepted a message from us for 180000ms (hold time), 0 messages
> > pending transmition.
> > Feb 15 03:53:38 PST: %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x active
> > 4/0 (hold time expired) 0 bytes
> > Feb 15 03:57:40 PST: %BGP-3-BGP_NO_REMOTE_READ: x.x.x.x connection timed
> > out
> > - has not accepted a message from us for 180000ms (hold time), 0 messages
> > pending transmition.
> > Feb 15 03:57:40 PST: %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x active
> > 4/0 (hold time expired) 0 bytes
> > Feb 15 04:03:08 PST: %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x active
> > 4/0 (hold time expired) 0 bytes
> > Feb 15 04:06:18 PST: %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x 4/0
> > (hold
> > time expired) 0 bytes
> > Feb 15 04:09:47 PST: %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x 4/0
> > (hold
> > time expired) 0 bytes
> > Feb 15 04:17:39 PST: %BGP-3-NOTIFICATION: received from neighbor x.x.x.x
> > active 2/8 (no supported AFI/SAFI) 3 bytes 000000
> > Feb 15 04:20:56 PST: %BGP-3-BGP_NO_REMOTE_READ: x.x.x.x connection timed
> > out
> > - has not accepted a message from us for 180000ms (hold time), 0 messages
> > pending transmition.
> >
> >
> >
> ***********************************************************************************************
> >
> > Few points :
> >
> > 1. I have tcp-mss set to 1400 on my ipsec tunnels on both ends.
> > 2. I have not tweaked the bgp timers.
> >
> >
> > Appreciate all the help.
> >
> >
> > --
> > Warm Regards
> > Raghav
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 01 2011 - 06:42:04 ART