Re: C6509 port channel and bridge assurance with nexus

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/stp_enha.html#wp1052528

"With Cisco IOS Release 12.2(33)SXI and later releases

Bridge Assurance is enabled by default and can only be disabled globally"

I had heard about this and seen this email, so gave me the oppurtunity to
read up on it a little, this list is still good for somethings i guess :)

--
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
"Complexity is the enemy of reliability..." -  often said but rarely
followed
On Mon, Feb 28, 2011 at 9:06 PM, Ccieyarub <ccieyarub_at_gmail.com> wrote:
> Hi all
>
> C6509 port channel and bridge assurance with nexus 7k
> I tried to do the configs from c6509 side:
> when i configure inside the portchannel
> Spanning-tree portfast network
> Command will not be accepted
> I have c6509E.
> 1. My sup is SUP720-3b would that be ok for portchann with bridge assurance
> 2. All I see is that the  image has to be 12.2(33)SXI5
> Is that means if I have this image that's it or there is more magic on this
>
> Thanks so much
> Bert
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net