ipv6 autoconfig

Hi Experts,

I am trying to lab INE vol1 ipv6 - 9.5 (IPv6 Auto-Configuration), but it
didn't work. I said perhaps I have a Vlan connectivity issues.
Then I tried to test it on the direct link between R1 and R3. It didn't work
as well.

R1:
interface Serial0/1
 ipv6 address 2001:1:0:13::1/64
 ipv6 nd prefix 2001:1:0:13::/64 14400 14400
 no ipv6 nd ra suppress
 ipv6 nd ra interval 40
 ipv6 nd ra lifetime 60

R3:
R3(config-if)#int s1/2
R3(config-if)#ipv6 address autoconfig default

On R3, debug ipv6 nd shows:
*Mar 1 03:16:58.923: ICMPv6-ND: Sending NS for FE80::C005:10FF:FE12:0 on
Serial1/2
*Mar 1 03:16:59.923: ICMPv6-ND: DAD: FE80::C005:10FF:FE12:0 is unique.
*Mar 1 03:16:59.927: ICMPv6-ND: Sending NA for FE80::C005:10FF:FE12:0 on
Serial1/2
*Mar 1 03:16:59.927: ICMPv6-ND: Linklocal FE80::C005:10FF:FE12:0 on
Serial1/2, Up
*Mar 1 03:16:59.931: ICMPv6-ND: Address FE80::C005:10FF:FE12:0/10 is up on
Serial1/2

On R1, debug ipv6 nd shows:
*Mar 1 03:17:44.875: ICMPv6-ND: Received NA for FE80::C005:10FF:FE12:0 on
Serial0/1 from FE80::C005:10FF:FE12:0

Is there anybody who tested it on dynamips?
Did I miss something?

BR,

Aliou

Blogs and organic groups at http://www.ccie.net
Received on Wed Feb 23 2011 - 17:11:10 ART