RE: Sequence of operation in BGP

You are welcome Jules, Let me know what exactly are you trying..I tested
this scenario once last month..It pretty much worked like that as mentioned
by Brian dennis on that link.

You should remember one thing that Output of the First one that is the most
preferred would become the input of second one and in turn the Output of the
second would become the input of the Final one i.e. third one.

From: jules NYA BAWEU [mailto:nyabaweu_at_gmail.com]
Sent: Friday, February 18, 2011 10:32 PM
To: gopal gupta
Cc: ccielab_at_groupstudy.com
Subject: Re: Sequence of operation in BGP

Thank you Gopal.

I did run into that link earlier; I actually tested some few scenarios, but
still have some gray areas...

On Thu, Feb 17, 2011 at 2:16 PM, gopal gupta <gopgupta_at_cisco.com> wrote:

Chk this..

http://blog.ine.com/2008/01/11/bgp-order-of-preference/#comments

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
jules NYA BAWEU
Sent: Thursday, February 17, 2011 3:52 PM
To: ccielab_at_groupstudy.com
Subject: Sequence of operation in BGP

Hello All:

Could you, please, clarify those for me? I did some quick search but
couldn't get a firm answer?

With BGP, could you tell me the sequence of operations the following are
applied for inbound/outbound routing info?

1 - suppress/ussupress map and attibute-map while using the aggregate
command

2- ussupress-map, route-map, filter-list and prefix-list/distribute-list (I
know we cannot use "neighbor prefix-list" and "neighbor distribute-list" in
the same direction - I'm looking more to the order for each as it pertains
to the previously mentioned)

Thanks in advance

Blogs and organic groups at http://www.ccie.net
Received on Fri Feb 18 2011 - 22:39:26 ART