RE: EEM Applet

Dear Tyson,
Thanks for sharing your Idea and I'm here Waiting for your Test Results,because that scenario really makes me crazy and i need to solve it as soon as possible :( due to the lack of keepalives end - to - end.
Thanks,
From: tscott_at_ipexpert.com
To: tetoo_me_at_hotmail.com; ccielab_at_groupstudy.com; markom_at_ipexpert.com
Subject: RE: EEM Applet
Date: Tue, 8 Feb 2011 13:43:07 -0500

I will test to see if I can find a way to do this, this is interesting to me. I am not sure without testing, I will get back when/if I figure it out. To give some ideas this is how you could do it with expect. set down_count 0set receive_count 0while { $down_count == 0 } { send "show mpls l2transport vc 10 detail\r" expect "show mpls l2transport vc 10 detail" expect { -re "receive \(\[0-9]+\)," { set string1 $expect_out(1,string) if { [ string match "$string1" "$receive_count" ] } { set down_count 1 } else { set receive_count "$string1"; sleep 5 } } } }send "configure terminal\r"expect "configure terminal"send "interface FastEthernet0/0.10\r"expect "interface FastEthernet0/0.10"send "shutdown\r"expect "shutdown"exec echo "SCRIPT Shu!
 tdown FastEthernet0/0.10 on RouterX. Please solve the problem and restart the script" | /bin/mail -s "FAILURE DETECTED" tetoo_me_at_hotmail.comexit 1 Expect is built on TCL which is what we use in IOS. If it is possible to do this same thing with EEM, which I am just not sure about, you would need to combine a TCL script with EEM to perform your function. But I would be nervous doing EEM like this in production. I would be nervous about it being caught in a loop and hogging resources. Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP
Managing Partner / Sr. Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com

  From: Mohamed Osama [mailto:tetoo_me_at_hotmail.com]
Sent: Tuesday, February 08, 2011 11:31 AM
To: Cisco certification; markom_at_ipexpert.com; tscott_at_ipexpert.com
Subject: OT : EEM Applet Dear all, Sorry for this,but I need to Configure a Complicate Embedded Event Manager Script that doing the Following : First issue the below Command : NewYork#show mpls l2transport vc 10 detail Local interface: FastEternet0/0.10 up, line protocol up, Eth VLAN 10 up Destination address: 192.168.1.102, VC ID: 10, VC status:up Tunnel label: not ready Create time: 22:31:53, last status change time: 04:02:56 Signaling protocol: LDP, peer 192.168.1.102:0 up VC statistics: packet totals: receive 1650, send 1743 byte totals: receive 552557, send 550044 packet drops: receive 0, send 7 Then Look at Packet totals : receive 1650 , and checks it Value using Logic loop or something, If EEM find receive value is the same which means we didn't recive any Packets which mean for me the Link is broken Then do the Following Action : shutdown int fa0/2.3 as Example ,so we terminate the Link and the other end of the tunnelcan know that we are not conne!
 cted anymore to the Customer Device. Can anyone help me with this please?I need to the Logical Sequence to do it and Logical Mathematical sentencefor checking Receive parameter?

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 08 2011 - 21:05:32 ART