OT : EEM Applet

Dear all,
Sorry for this,but I need to Configure a Complicate Embedded Event Manager Script that doing the Following :
First issue the below Command :
NewYork#show mpls l2transport vc 10 detail
Local interface: FastEternet0/0.10 up, line protocol up, Eth VLAN 10 up
  Destination address: 192.168.1.102, VC ID: 10, VC status:up
    Tunnel label: not ready
  Create time: 22:31:53, last status change time: 04:02:56
  Signaling protocol: LDP, peer 192.168.1.102:0 up
  VC statistics:
    packet totals: receive 1650, send 1743
    byte totals: receive 552557, send 550044
    packet drops: receive 0, send 7

Then Look at Packet totals : receive 1650 , and checks it Value using Logic loop or something,
If EEM find receive value is the same which means we didn't recive any Packets which mean for me the Link is broken
Then do the Following Action : shutdown int fa0/2.3 as Example ,so we terminate the Link and the other end of the tunnelcan know that we are not connected anymore to the Customer Device.
Can anyone help me with this please?I need to the Logical Sequence to do it and Logical Mathematical sentencefor checking Receive parameter?

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 08 2011 - 18:31:23 ART