RE: No SOLUTION till DATE for this SCNERIO ???? Challenging

Thanks
Scoottt, I surely will try to check the tutorials but the problem is that Its
very basic thing which is not coming up ?
I am trying to run the Multicast in INTRA-AS between my two sites(R9 and
R7/R8) connected via MPLS - VPN's . (R4 is RP and client & R5 is SOURCE)
Everything runs smoothly unless, I introduce the default route from the (R6)
which is the internet gateway for my PE's of ABC Vpn's.

Whenever the default route is injected my PE outgoing interface donot point
towards the tunnel and starts to follow the 0.0.0.0 source !! which breaks my
multicast communication and messes everything !
I can share the details with you even further, I discussed this scenerio will
couple of other CCIE's but somehow no one has managed to answer my solution ?
thanks

CC: markom_at_ipexpert.com; ccielab_at_groupstudy.com
From: scott_ccie_list_at_it-ag.com
To: s_asfar_at_hotmail.com
Subject: Re: No SOLUTION till DATE for this SCNERIO ???? Challenging MULTICAST
TASK ?? Please help
Date: Wed, 2 Feb 2011 11:17:11 -0700

So it looks as if you've got some vendor's full-scale SP lab up and running
there. Lots of layers to an onion like that which are not going to be readily
apparent with just a glance over the configs. It's also not evident from your
text exactly what was working before the introduction of the default route
came along and broke things. I see you've got a couple of 'ip igmp
join-group' commands on your CEs but it's not clear to me what you were
pinging - and from where - that worked and then later ceased working. What
mcast troubleshooting have you done thus far?
I try to keep my posts as vendor-neutral as possible but if you google
"multicast troubleshooting" you will find a couple of very, very good
tutorials out there. If you follow a logical process of validating all of
your various control and data plane RPF checks, etc, you are bound to find the
problem for yourself quickly...
 ____________________________________________There are only 10 types of people
in the world:
Those who understand binary and those who do not...
On Feb 2, 2011, at 2:50 , Asfer Shah wrote:
thanks for the quick Reply, Actually I am appearing in les than a week time
and I am failing to understand this buG !!
nothing much I could figure out !!!
I am hell stuck,since either multcast or Internet will wok at a single time
!!

CE1 is dual homed to PE5 and PE3, we have three GRE (MDT) tunnels between PE2
, PE 5 and PE3
thanks

                                          |--------------------------PE5-----
-----
                                          |
|
> > INT---------PE1--------PE2--------------------------PE3--------CE1
> > | |
> > | |
> > PE4 CE2

> From: markom_at_ipexpert.com
> Date: Wed, 2 Feb 2011 10:16:40 +0100
> Subject: Re: No SOLUTION till DATE for this SCNERIO ???? Challenging
MULTICAST TASK ?? Please help
> To: s_asfar_at_hotmail.com
> CC: bmcgahan_at_ine.com; scott_ccie_list_at_it-ag.com; ccielab_at_groupstudy.com;
narbikk_at_gmail.com
>
> Can you please post all the relevant configurations to the list so we
> can actually troubleshoot it? :-)
>
> --
> Marko Milivojevic - CCIE #18427
> Senior Technical Instructor - IPexpert
>
> FREE CCIE training: http://bit.ly/vLecture
>
> Mailto: markom_at_ipexpert.com
> Telephone: +1.810.326.1444
> Web: http://www.ipexpert.com/
>
> On Wed, Feb 2, 2011 at 09:03, Asfer Shah <s_asfar_at_hotmail.com> wrote:
> > Hello ,
> > I have a Query to which no one have answered so far ??
> >
> > PE2-PE3 are in AS20 and are MP-iBGP neighbor to each other.
> > CE1 and CE2 are two sites connected to PE2 and PE3 respectively talking
> > through the MPLS VPN cloud.
> > The multicast distribution trees are also configured and the Intra-AS
> > multicast end-to-end is working smoothly fine between CE1-CE2.
> >
> > I have the below topology in which I have a trouble.
> >
> >
> >
> > INT---------PE1--------PE2-------PE3--------CE1
> > | |
> > | |
> > PE4 CE2
> >
> >
> > Now,I have PE1 in AS 10 which is gateway to the internet and is peering
with
> > PE2 for ipv4 (add-fam) only.
> > I have PE4 in (AS30) which is peering with PE1 for both ipv4 and vpnv4
> > (add-families)
> > PE4 is Multihop Mp-eBGP neighbor to both the PE2 and PE3.
> >
> > PE1 is advertising the internet (0.0.0.0 in vpnv4 add family) to PE4 and
then
> > PE4 is throwing it to PE2 and PE3
> > After manipulating the Next-Hop , PE2 and PE3 do watch the internet
default
> > vpnv4 route 0.0.0.0 coming from PE1 and they do access the internet
easily.
> >
> > At this point when I check back the multicast between CE1 and CE2 , it
will
> > stop working and the traffic is dropped
> > The momnet , I remove the 0.0.0.0 route adver in the vpnv4 from PE1 , my
> > multicast will run perfectly fine.
> >
> > There is PIM running between PE1 PE2 and PE4 but no solution to the
problem
> > till date !!
> > Can you please help me in this special problem ???
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
<CE1.cfg><CE2.cfg><PE1.cfg><PE2.cfg><PE3.cfg><PE4.cfg><PE5.cfg>

Blogs and organic groups at http://www.ccie.net
Received on Thu Feb 03 2011 - 02:31:22 ART