Re: Route-Maps & Prefix-list

nopes you are absolutly right..!!
-Raghav

On Tue, Jan 25, 2011 at 11:06 AM, Paul Negron <negron.paul_at_gmail.com> wrote:

> I believe he said that it was not applied as a local or interface
> policy-routing configuration. I could be wrong but that is what I followed
> so far.
> --
> Paul Negron
> CCIE# 14856 CCSI# 22752
> Senior Technical Instructor
> www.micronicstraining.com
>
>
>
> > From: Max Pierson <nmaxpierson_at_gmail.com>
> > Reply-To: Max Pierson <nmaxpierson_at_gmail.com>
> > Date: Tue, 25 Jan 2011 12:42:51 -0600
> > To: Raghav Bhargava <raghavbhargava12_at_gmail.com>
> > Cc: Cisco certification <ccielab_at_groupstudy.com>
> > Subject: Re: Route-Maps & Prefix-list
> >
> > Hi Ragav,
> >
> > Based on your output, you're saying "I want everything that matches
> prefixes
> > longer than a /31 and tag them with said community" which seems to be
> > correct, but what exactly is this route-map for (how is it being
> applied)??
> > You may not be seeing any matches because what your expecting to see is
> not
> > getting to the route-map in the first place to even be checked against
> your
> > prefix list. Could you clue us in a little more on what the route-map is
> > used for??
> >
> > Max
> >
> >
> >
> > On Tue, Jan 25, 2011 at 12:14 PM, Raghav Bhargava <
> > raghavbhargava12_at_gmail.com> wrote:
> >
> >> Hi Experts,
> >>
> >> I have a stupid query.
> >>
> >> 1. When we configure route-maps on a router /layer 3 switch . We either
> >> match anything or set something on it.
> >>
> >> For example: route-map XYZ permit 10
> >> match ip address prefix-list DIRECT
> >> set community x:y
> >> !
> >> ip prefix-list DIRECT seq 5 permit 0.0.0.0/0 ge
> 31
> >> le 32
> >>
> >> Now in this route-map i am matching a prefix-list DIRECT which actually
> >> matches all the directly connected routes on the device. My prefix-list
> has
> >> been defined like that. The 3 networks are all /32's on the box..
> >>
> >> My question is now when i do show route-map XYZ,
> >>
> >> route-map XYZ, permit, sequence 10
> >> Match clauses:
> >> ip address prefix-lists: DIRECT
> >> Set clauses:
> >> community x/y
> >> * Policy routing matches: 0 packets, 0 bytes* *>>>>> This is where i
> am
> >> confused. I don't see policy routing matches number as 3 which i think i
> >> should since i have 3 /32's configured on the box and my prefix-list is
> >> also
> >> configured for the same.*
> >>
> >> I may be missing something here . Kindly advise
> >>
> >> --
> >> Warm Regards
> >> Raghav
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
>
>
>

-- 
Warm Regards
Raghav
Blogs and organic groups at http://www.ccie.net