Re: Startup script

is it okay to apply following in troubleshooting section (there could be
restrictions per router/switch) ?

ip routing
ip cef

On 01/25/2011 09:36 AM, Nick Matthews wrote:
> This may have changed, but 2 years ago when I took it there were no
> restrictions. I did the same thing on saving the initial configuration.
>
> The problem that arises is that there isn't anything stopping someone from
> copying a fully working lab config to the flash. The routers are generally
> cleared via script, and I don't think they had programmed their script to
> scrape the flash. I say this because as I was poking around I saw a
> half-finished config on the flash for a different lab and alerted the
> proctor. He said that you shouldn't write to flash; people obviously do
> anyway. They may have formalized it somehow.
>
> -nick
>
> On Sun, Jan 23, 2011 at 9:05 PM, Nathan Pease <pease.nathan_at_gmail.com>wrote:
>
>> I usually do a quick glance to make sure that all interfaces that have an
>> IP
>> assigned are up, good point about a DHCP interface.
>>
>> Why can't we write to flash???
>>
>> On Sun, Jan 23, 2011 at 7:49 PM, David Prall <dcp_at_dcptech.com> wrote:
>>
>>> Why don't you care about interfaces that have no address assigned. The
>>> interface could be using DHCP, and be admin down. Would be terrible to
>> not
>>> be able to reach something because the next-hop is over that interface.
>> Sh
>>> cdp nei should help correct this, unless of course cdp has been disabled.
>>>
>>> --
>>> http://dcp.dcptech.com
>>>
>>>
>>>> -----Original Message-----
>>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
>> Of
>>>> Nathan Pease
>>>> Sent: Sunday, January 23, 2011 8:19 PM
>>>> To: Cisco certification
>>>> Subject: Startup script
>>>>
>>>> I plan on pasting the following script into all of my routers and
>>>> switches
>>>> in the troubleshooting and configuration sections of the R&S lab. Does
>>>> anyone see any issues or have any commands that I should add? I don't
>>>> plan
>>>> on using aliases.
>>>>
>>>> enable
>>>> copy run flash:backup.cfg
>>>> config t
>>>> no ip domain-lookup
>>>> lin con 0
>>>> logging synch
>>>> no exec-t
>>>> history size 200
>>>> exit
>>>> ip routing
>>>> ip cef
>>>> ip subnet-zero
>>>> ip classless
>>>> logging console
>>>> end
>>>> sh ip int br | e una
>>>> sh cdp neigh
>>>> debug ip routing
>>>> wr
>>>> !
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
/Lefe Meedorf/
Blogs and organic groups at http://www.ccie.net