What Hardware are you using for your hub?
-- Paul Negron CCIE# 14856 CCSI# 22752 Senior Technical Instructor www.micronicstraining.com > From: David Prall <dcp_at_dcptech.com> > Organization: DCP Technologies > Reply-To: David Prall <dcp_at_dcptech.com> > Date: Tue, 4 Jan 2011 13:44:57 -0500 > To: 'sameer inam' <i_sameer_at_hotmail.com>, <amsoares_at_netcabo.pt>, > <ccielab_at_groupstudy.com> > Subject: RE: DMVPN Spokes > > Can't tell you without knowing more. At this point - Upgrade to the latest > code and if you continue to have the issue send "sh tech"'s and drawing of > the network. > > -- > http://dcp.dcptech.com > > >> -----Original Message----- >> From: sameer inam [mailto:i_sameer_at_hotmail.com] >> Sent: Tuesday, January 04, 2011 1:32 PM >> To: dcp_at_dcptech.com; amsoares_at_netcabo.pt; ccielab_at_groupstudy.com >> Subject: RE: DMVPN Spokes >> >> I m using OSPF routing protocol.its looke like there is no routing loop >> . the issue which I seen is packet has be lost after some time to >> there destination .I can see when the One ping to DMVPN hub stopped and >> other one working fine at that crypto keep up . NHRP stable but ping >> repsoned stopped with one hub and other one worked fine ... >> >> if you could advice me how we can fix this issue it will be much >> appreciated. >> >> Sameer >> >> >> >> >> >> >> >>> From: dcp_at_dcptech.com >>> To: i_sameer_at_hotmail.com; amsoares_at_netcabo.pt; ccielab_at_groupstudy.com >>> Subject: RE: DMVPN Spokes >>> Date: Tue, 4 Jan 2011 10:36:51 -0500 >>> >>> Fails after 30 minutes, 30 minutes exactly? What timer is kicking off >> at 30 >>> Minutes, ISAKMP is 24 Hours by default, IPSec is 1 hour by default, >> Routing >>> Protocols are nowhere near 30 minutes (15 seconds EIGRP, 40 seconds >> OSPF), >>> NHRP Holdtime is 2 hours by default. >>> >>> What routing protocol are you using? >>> What do your configs actually look like? >>> What does your routing table look like, are you creating a routing >> loop that >>> is causing other issues? >>> >>> David >>> >>> -- >>> http://dcp.dcptech.com >>> >>> >>>> -----Original Message----- >>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On >> Behalf Of >>>> sameer inam >>>> Sent: Tuesday, January 04, 2011 8:23 AM >>>> To: amsoares_at_netcabo.pt; dcp_at_dcptech.com; ccielab_at_groupstudy.com >>>> Subject: RE: DMVPN Spokes >>>> >>>> have one spoke router two different hub ...no i havent try vrf ... >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>> From: amsoares_at_netcabo.pt >>>>> To: i_sameer_at_hotmail.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com >>>>> Subject: RE: DMVPN Spokes >>>>> Date: Tue, 4 Jan 2011 13:19:24 +0000 >>>>> >>>>> So you want to simulate several spokes on a single router ? Have >> you >>>> tried >>>>> using VRF's ? >>>>> >>>>> >>>>> Regards, >>>>> >>>>> Antonio Soares, CCIE #18473 (R&S/SP) >>>>> amsoares_at_netcabo.pt >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On >> Behalf >>>> Of >>>>> sameer inam >>>>> Sent: terga-feira, 4 de Janeiro de 2011 12:34 >>>>> To: dcp_at_dcptech.com; ccielab_at_groupstudy.com >>>>> Subject: RE: DMVPN Spokes >>>>> >>>>> I tried all the option which you told me .. its worked for 30 min >> and >>>> then >>>>> one >>>>> of the tunnel drops. any advice >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> From: dcp_at_dcptech.com >>>>>> To: i_sameer_at_hotmail.com >>>>>> Subject: RE: DMVPN Spokes >>>>>> Date: Sat, 1 Jan 2011 16:25:31 -0500 >>>>>> >>>>>> You'll need different nhrp id's and tunnel key's if they are >> using >>>> the >>>>> same >>>>>> source address/interface. If using tunnel protection you will >> need >>>> the >>>>>> shared keyword. You should be able to look at the DMVPN SRND on >>>> dual >>>>> tunnel >>>>>> dual dmvpn designs. >>>>>> >>>>>> -- >>>>>> http://dcp.dcptech.com >>>>>> >>>>>> >>>>>>> -----Original Message----- >>>>>>> From: sameer inam [mailto:i_sameer_at_hotmail.com] >>>>>>> Sent: Saturday, January 01, 2011 3:45 PM >>>>>>> To: dcp_at_dcptech.com >>>>>>> Subject: RE: DMVPN Spokes >>>>>>> >>>>>>> ok , I tried to use different Key , different profile >> protection >>>> (but >>>>>>> Not with Shared) different Netwrk ID on both tunnels .but >> source >>>>>>> tunnel is same ,, I will try to use different Source and also >>>> shared >>>>>>> key wordward with profile protection , Do you have any >> document >>>> for >>>>>>> that ? I really appreaicte your kind help >>>>>>> >>>>>>> Sameer >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> From: dcp_at_dcptech.com >>>>>>>> To: ron.wilkerson_at_gmail.com; i_sameer_at_hotmail.com; >>>>>>> ccielab_at_groupstudy.com >>>>>>>> Subject: RE: DMVPN Spokes >>>>>>>> Date: Sat, 1 Jan 2011 15:38:03 -0500 >>>>>>>> >>>>>>>> If they are using the same source address/inteface then you >>>> will have >>>>>>> to use >>>>>>>> the shared keyword on tunnel protection. You will also need >> to >>>> use >>>>>>> tunnel >>>>>>>> keys on both interfaces so that packets are dropped off on >> the >>>>>>> correct >>>>>>>> tunnel. Otherwise you need to use dedicated source >> interfaces >>>> for >>>>>>> each >>>>>>>> tunnel interface, such as a loopback for each. >>>>>>>> >>>>>>>> David >>>>>>>> >>>>>>>> -- >>>>>>>> http://dcp.dcptech.com >>>>>>>> >>>>>>>> >>>>>>>>> -----Original Message----- >>>>>>>>> From: nobody_at_groupstudy.com >> [mailto:nobody_at_groupstudy.com] On >>>>>>> Behalf Of >>>>>>>>> ron.wilkerson_at_gmail.com >>>>>>>>> Sent: Saturday, January 01, 2011 3:29 PM >>>>>>>>> To: sameer inam; ccielab_at_groupstudy.com >>>>>>>>> Subject: Re: DMVPN Spokes >>>>>>>>> >>>>>>>>> Google for cisco's dmvpn srnd >>>>>>>>> Sent from my Verizon Wireless BlackBerry >>>>>>>>> >>>>>>>>> -----Original Message----- >>>>>>>>> From: sameer inam <i_sameer_at_hotmail.com> >>>>>>>>> Date: Sat, 1 Jan 2011 20:16:33 >>>>>>>>> To: <ron.wilkerson_at_gmail.com>; <ccielab_at_groupstudy.com> >>>>>>>>> Subject: RE: DMVPN Spokes >>>>>>>>> >>>>>>>>> >>>>>>>>> I tried with different DMVPN domain , Network-ID and Key >> and >>>> also >>>>>>>>> different profile but issue Tunnel was up for while and >> then >>>>>>> droped. >>>>>>>>> could you please advice any document ? >>>>>>>>> >>>>>>>>> Thanks for your help >>>>>>>>> >>>>>>>>> Sameer >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Subject: Re: DMVPN Spokes >>>>>>>>>> To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com >>>>>>>>>> From: ron.wilkerson_at_gmail.com >>>>>>>>>> Date: Sat, 1 Jan 2011 20:18:58 +0000 >>>>>>>>>> >>>>>>>>>> Yes. Each tunnel will be in a different dmvpn domain. >>>>>>>>>> ------Original Message------ >>>>>>>>>> From: sameer inam >>>>>>>>>> Sender: nobody_at_groupstudy.com >>>>>>>>>> To: ccielab_at_groupstudy.com >>>>>>>>>> ReplyTo: sameer inam >>>>>>>>>> Subject: DMVPN Spokes >>>>>>>>>> Sent: Jan 1, 2011 15:09 >>>>>>>>>> >>>>>>>>>> Dear Experts, >>>>>>>>>> >>>>>>>>>> I have one router whichis on Spoke end , and I have two >>>> different >>>>>>>>> DMVPN Hubs >>>>>>>>>> , can I configure two spokes configuration on one >> single >>>> router ? >>>>>>>>> please >>>>>>>>>> advice ? >>>>>>>>>> >>>>>>>>>> Kind regards, >>>>>>>>>> >>>>>>>>>> Sameer >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Blogs and organic groups at http://www.ccie.net >>>>>>>>>> >>>>>>>>> >>>>>>> >>>> >>> ______________________________________________________________________ >>>>>>>>> _ >>>>>>>>>> Subscription information may be found at: >>>>>>>>>> http://www.groupstudy.com/list/CCIELab.html >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Sent from my Verizon Wireless BlackBerry >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Blogs and organic groups at http://www.ccie.net >>>>>>>>>> >>>>>>>>> >>>>>>> >>>> >>> ______________________________________________________________________ >>>>>>>>> _ >>>>>>>>>> Subscription information may be found at: >>>>>>>>>> http://www.groupstudy.com/list/CCIELab.html >>>>>>>>> >>>>>>>>> >>>>>>>>> Blogs and organic groups at http://www.ccie.net >>>>>>>>> >>>>>>>>> >>>>>>> >>>> >> _______________________________________________________________________ >>>>>>>>> Subscription information may be found at: >>>>>>>>> http://www.groupstudy.com/list/CCIELab.html >>>>> >>>>> >>>>> Blogs and organic groups at http://www.ccie.net >>>>> >>>>> >>>> >> _______________________________________________________________________ >>>>> Subscription information may be found at: >>>>> http://www.groupstudy.com/list/CCIELab.html >>>> >>>> >>>> Blogs and organic groups at http://www.ccie.net >>>> >>>> >> _______________________________________________________________________ >>>> Subscription information may be found at: >>>> http://www.groupstudy.com/list/CCIELab.html >>> >>> >>> Blogs and organic groups at http://www.ccie.net >>> >>> >> _______________________________________________________________________ >>> Subscription information may be found at: >>> http://www.groupstudy.com/list/CCIELab.html > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html Blogs and organic groups at http://www.ccie.netReceived on Tue Jan 04 2011 - 11:55:29 ART
This archive was generated by hypermail 2.2.0 : Tue Feb 01 2011 - 07:39:17 ART