RE: DMVPN Spokes

I m using OSPF routing protocol.its looke like there is no routing loop . the
issue which I seen is packet has be lost after some time to there destination
.I can see when the One ping to DMVPN hub stopped and other one working fine
at that crypto keep up . NHRP stable but ping repsoned stopped with one hub
and other one worked fine ...

if you could advice me how we can fix this issue it will be much
appreciated.

Sameer

> From: dcp_at_dcptech.com
> To: i_sameer_at_hotmail.com; amsoares_at_netcabo.pt; ccielab_at_groupstudy.com
> Subject: RE: DMVPN Spokes
> Date: Tue, 4 Jan 2011 10:36:51 -0500
>
> Fails after 30 minutes, 30 minutes exactly? What timer is kicking off at 30
> Minutes, ISAKMP is 24 Hours by default, IPSec is 1 hour by default, Routing
> Protocols are nowhere near 30 minutes (15 seconds EIGRP, 40 seconds OSPF),
> NHRP Holdtime is 2 hours by default.
>
> What routing protocol are you using?
> What do your configs actually look like?
> What does your routing table look like, are you creating a routing loop
that
> is causing other issues?
>
> David
>
> --
> http://dcp.dcptech.com
>
>
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > sameer inam
> > Sent: Tuesday, January 04, 2011 8:23 AM
> > To: amsoares_at_netcabo.pt; dcp_at_dcptech.com; ccielab_at_groupstudy.com
> > Subject: RE: DMVPN Spokes
> >
> > have one spoke router two different hub ...no i havent try vrf ...
> >
> >
> >
> >
> >
> >
> >
> > > From: amsoares_at_netcabo.pt
> > > To: i_sameer_at_hotmail.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
> > > Subject: RE: DMVPN Spokes
> > > Date: Tue, 4 Jan 2011 13:19:24 +0000
> > >
> > > So you want to simulate several spokes on a single router ? Have you
> > tried
> > > using VRF's ?
> > >
> > >
> > > Regards,
> > >
> > > Antonio Soares, CCIE #18473 (R&S/SP)
> > > amsoares_at_netcabo.pt
> > >
> > >
> > > -----Original Message-----
> > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> > Of
> > > sameer inam
> > > Sent: terga-feira, 4 de Janeiro de 2011 12:34
> > > To: dcp_at_dcptech.com; ccielab_at_groupstudy.com
> > > Subject: RE: DMVPN Spokes
> > >
> > > I tried all the option which you told me .. its worked for 30 min and
> > then
> > > one
> > > of the tunnel drops. any advice
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > From: dcp_at_dcptech.com
> > > > To: i_sameer_at_hotmail.com
> > > > Subject: RE: DMVPN Spokes
> > > > Date: Sat, 1 Jan 2011 16:25:31 -0500
> > > >
> > > > You'll need different nhrp id's and tunnel key's if they are using
> > the
> > > same
> > > > source address/interface. If using tunnel protection you will need
> > the
> > > > shared keyword. You should be able to look at the DMVPN SRND on
> > dual
> > > tunnel
> > > > dual dmvpn designs.
> > > >
> > > > --
> > > > http://dcp.dcptech.com
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: sameer inam [mailto:i_sameer_at_hotmail.com]
> > > > > Sent: Saturday, January 01, 2011 3:45 PM
> > > > > To: dcp_at_dcptech.com
> > > > > Subject: RE: DMVPN Spokes
> > > > >
> > > > > ok , I tried to use different Key , different profile protection
> > (but
> > > > > Not with Shared) different Netwrk ID on both tunnels .but source
> > > > > tunnel is same ,, I will try to use different Source and also
> > shared
> > > > > key wordward with profile protection , Do you have any document
> > for
> > > > > that ? I really appreaicte your kind help
> > > > >
> > > > > Sameer
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > From: dcp_at_dcptech.com
> > > > > > To: ron.wilkerson_at_gmail.com; i_sameer_at_hotmail.com;
> > > > > ccielab_at_groupstudy.com
> > > > > > Subject: RE: DMVPN Spokes
> > > > > > Date: Sat, 1 Jan 2011 15:38:03 -0500
> > > > > >
> > > > > > If they are using the same source address/inteface then you
> > will have
> > > > > to use
> > > > > > the shared keyword on tunnel protection. You will also need to
> > use
> > > > > tunnel
> > > > > > keys on both interfaces so that packets are dropped off on the
> > > > > correct
> > > > > > tunnel. Otherwise you need to use dedicated source interfaces
> > for
> > > > > each
> > > > > > tunnel interface, such as a loopback for each.
> > > > > >
> > > > > > David
> > > > > >
> > > > > > --
> > > > > > http://dcp.dcptech.com
> > > > > >
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> > > > > Behalf Of
> > > > > > > ron.wilkerson_at_gmail.com
> > > > > > > Sent: Saturday, January 01, 2011 3:29 PM
> > > > > > > To: sameer inam; ccielab_at_groupstudy.com
> > > > > > > Subject: Re: DMVPN Spokes
> > > > > > >
> > > > > > > Google for cisco's dmvpn srnd
> > > > > > > Sent from my Verizon Wireless BlackBerry
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: sameer inam <i_sameer_at_hotmail.com>
> > > > > > > Date: Sat, 1 Jan 2011 20:16:33
> > > > > > > To: <ron.wilkerson_at_gmail.com>; <ccielab_at_groupstudy.com>
> > > > > > > Subject: RE: DMVPN Spokes
> > > > > > >
> > > > > > >
> > > > > > > I tried with different DMVPN domain , Network-ID and Key and
> > also
> > > > > > > different profile but issue Tunnel was up for while and then
> > > > > droped.
> > > > > > > could you please advice any document ?
> > > > > > >
> > > > > > > Thanks for your help
> > > > > > >
> > > > > > > Sameer
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > Subject: Re: DMVPN Spokes
> > > > > > > > To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com
> > > > > > > > From: ron.wilkerson_at_gmail.com
> > > > > > > > Date: Sat, 1 Jan 2011 20:18:58 +0000
> > > > > > > >
> > > > > > > > Yes. Each tunnel will be in a different dmvpn domain.
> > > > > > > > ------Original Message------
> > > > > > > > From: sameer inam
> > > > > > > > Sender: nobody_at_groupstudy.com
> > > > > > > > To: ccielab_at_groupstudy.com
> > > > > > > > ReplyTo: sameer inam
> > > > > > > > Subject: DMVPN Spokes
> > > > > > > > Sent: Jan 1, 2011 15:09
> > > > > > > >
> > > > > > > > Dear Experts,
> > > > > > > >
> > > > > > > > I have one router whichis on Spoke end , and I have two
> > different
> > > > > > > DMVPN Hubs
> > > > > > > > , can I configure two spokes configuration on one single
> > router ?
> > > > > > > please
> > > > > > > > advice ?
> > > > > > > >
> > > > > > > > Kind regards,
> > > > > > > >
> > > > > > > > Sameer
> > > > > > > >
> > > > > > > >
> > > > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > > > >
> > > > > > >
> > > > >
> > >______________________________________________________________________
> > > > > > > _
> > > > > > > > Subscription information may be found at:
> > > > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Sent from my Verizon Wireless BlackBerry
> > > > > > > >
> > > > > > > >
> > > > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > > > >
> > > > > > >
> > > > >
> > >______________________________________________________________________
> > > > > > > _
> > > > > > > > Subscription information may be found at:
> > > > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > > > >
> > > > > > >
> > > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > > >
> > > > > > >
> > > > >
> > _______________________________________________________________________
> > > > > > > Subscription information may be found at:
> > > > > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jan 04 2011 - 18:31:32 ART