RE: DMVPN Spokes

 have one spoke router two different hub ...no i havent try vrf ...

> From: amsoares_at_netcabo.pt
> To: i_sameer_at_hotmail.com; dcp_at_dcptech.com; ccielab_at_groupstudy.com
> Subject: RE: DMVPN Spokes
> Date: Tue, 4 Jan 2011 13:19:24 +0000
>
> So you want to simulate several spokes on a single router ? Have you tried
> using VRF's ?
>
>
> Regards,
>
> Antonio Soares, CCIE #18473 (R&S/SP)
> amsoares_at_netcabo.pt
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> sameer inam
> Sent: terga-feira, 4 de Janeiro de 2011 12:34
> To: dcp_at_dcptech.com; ccielab_at_groupstudy.com
> Subject: RE: DMVPN Spokes
>
> I tried all the option which you told me .. its worked for 30 min and then
> one
> of the tunnel drops. any advice
>
>
>
>
>
>
>
> > From: dcp_at_dcptech.com
> > To: i_sameer_at_hotmail.com
> > Subject: RE: DMVPN Spokes
> > Date: Sat, 1 Jan 2011 16:25:31 -0500
> >
> > You'll need different nhrp id's and tunnel key's if they are using the
> same
> > source address/interface. If using tunnel protection you will need the
> > shared keyword. You should be able to look at the DMVPN SRND on dual
> tunnel
> > dual dmvpn designs.
> >
> > --
> > http://dcp.dcptech.com
> >
> >
> > > -----Original Message-----
> > > From: sameer inam [mailto:i_sameer_at_hotmail.com]
> > > Sent: Saturday, January 01, 2011 3:45 PM
> > > To: dcp_at_dcptech.com
> > > Subject: RE: DMVPN Spokes
> > >
> > > ok , I tried to use different Key , different profile protection (but
> > > Not with Shared) different Netwrk ID on both tunnels .but source
> > > tunnel is same ,, I will try to use different Source and also shared
> > > key wordward with profile protection , Do you have any document for
> > > that ? I really appreaicte your kind help
> > >
> > > Sameer
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > From: dcp_at_dcptech.com
> > > > To: ron.wilkerson_at_gmail.com; i_sameer_at_hotmail.com;
> > > ccielab_at_groupstudy.com
> > > > Subject: RE: DMVPN Spokes
> > > > Date: Sat, 1 Jan 2011 15:38:03 -0500
> > > >
> > > > If they are using the same source address/inteface then you will have
> > > to use
> > > > the shared keyword on tunnel protection. You will also need to use
> > > tunnel
> > > > keys on both interfaces so that packets are dropped off on the
> > > correct
> > > > tunnel. Otherwise you need to use dedicated source interfaces for
> > > each
> > > > tunnel interface, such as a loopback for each.
> > > >
> > > > David
> > > >
> > > > --
> > > > http://dcp.dcptech.com
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> > > Behalf Of
> > > > > ron.wilkerson_at_gmail.com
> > > > > Sent: Saturday, January 01, 2011 3:29 PM
> > > > > To: sameer inam; ccielab_at_groupstudy.com
> > > > > Subject: Re: DMVPN Spokes
> > > > >
> > > > > Google for cisco's dmvpn srnd
> > > > > Sent from my Verizon Wireless BlackBerry
> > > > >
> > > > > -----Original Message-----
> > > > > From: sameer inam <i_sameer_at_hotmail.com>
> > > > > Date: Sat, 1 Jan 2011 20:16:33
> > > > > To: <ron.wilkerson_at_gmail.com>; <ccielab_at_groupstudy.com>
> > > > > Subject: RE: DMVPN Spokes
> > > > >
> > > > >
> > > > > I tried with different DMVPN domain , Network-ID and Key and also
> > > > > different profile but issue Tunnel was up for while and then
> > > droped.
> > > > > could you please advice any document ?
> > > > >
> > > > > Thanks for your help
> > > > >
> > > > > Sameer
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > Subject: Re: DMVPN Spokes
> > > > > > To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com
> > > > > > From: ron.wilkerson_at_gmail.com
> > > > > > Date: Sat, 1 Jan 2011 20:18:58 +0000
> > > > > >
> > > > > > Yes. Each tunnel will be in a different dmvpn domain.
> > > > > > ------Original Message------
> > > > > > From: sameer inam
> > > > > > Sender: nobody_at_groupstudy.com
> > > > > > To: ccielab_at_groupstudy.com
> > > > > > ReplyTo: sameer inam
> > > > > > Subject: DMVPN Spokes
> > > > > > Sent: Jan 1, 2011 15:09
> > > > > >
> > > > > > Dear Experts,
> > > > > >
> > > > > > I have one router whichis on Spoke end , and I have two different
> > > > > DMVPN Hubs
> > > > > > , can I configure two spokes configuration on one single router ?
> > > > > please
> > > > > > advice ?
> > > > > >
> > > > > > Kind regards,
> > > > > >
> > > > > > Sameer
> > > > > >
> > > > > >
> > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > >
> > > > >
> > > >______________________________________________________________________
> > > > > _
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Sent from my Verizon Wireless BlackBerry
> > > > > >
> > > > > >
> > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > >
> > > > >
> > > >______________________________________________________________________
> > > > > _
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jan 04 2011 - 13:23:21 ART