RE: QOS in Cisco 7609

Could anyone answer my question please ? How this layer 2 QOS works under
layer 3 interface ???

Thanks,
Terry

> From: tortletang_at_hotmail.com
> To: davidbass570_at_gmail.com; ccielab_at_groupstudy.com
> Subject: RE: QOS in Cisco 7609
> Date: Wed, 29 Dec 2010 13:37:38 +1100
>
> Hi
> The following is the policy.
>
> class-map match-any realtime_ipp
> match ip precedence 5
> policy-map PE_to_CORE_Police_RT
> class realtime_ipp
> police cir 600000000 conform-action transmit exceed-action drop
>
>
> class-map match-any realtime_exp
> match mpls experimental topmost 5
> policy-map CORE_to_PE_Police_RT
> class realtime_exp
> police cir 600000000 conform-action transmit exceed-action drop
>
>
> Thanks,
> Terry
>
>
>
>
> > Subject: Re: QOS in Cisco 7609
> > From: davidbass570_at_gmail.com
> > Date: Tue, 28 Dec 2010 20:02:38 -0600
> > To: tortletang_at_hotmail.com
> >
> > Could you send the L3 policy out as well?
> >
> > Sent from my iPhone
> >
> > On Dec 28, 2010, at 6:04 PM, Tortle Tang <tortletang_at_hotmail.com> wrote:
> >
> > > Hi
> > >
> > > I saw the following in cisco 7609, I am Just wondering how it works ,
as
> the
> > > interfaces is IP interface, however the qos is for COS (layer2).
> > > Do your guys have any idea? or do you think the layer 2 QOS is working
> for
> > > this layer 3 IP interface ?
> > >
> > >
> > > Current configuration : 945 bytes
> > > !
> > > interface GigabitEthernet5/1
> > > mtu 1534
> > > ip address 10.104.234.2 255.255.255.252
> > > ip mtu 1500
> > > ip flow ingress
> > > ip ospf message-digest-key 1 md5 7 020B555505575C2C1C5B1A4A
> > > ip ospf bfd
> > > wrr-queue bandwidth percent 65 35
> > > wrr-queue queue-limit 40 30
> > > wrr-queue random-detect min-threshold 1 40 80
> > > wrr-queue random-detect min-threshold 2 70 80
> > > wrr-queue random-detect max-threshold 1 80 100
> > > wrr-queue random-detect max-threshold 2 80 100
> > > wrr-queue cos-map 1 1 1
> > > wrr-queue cos-map 1 2 0 4
> > > wrr-queue cos-map 2 1 2 3
> > > wrr-queue cos-map 2 2 6 7
> > > mpls traffic-eng tunnels
> > > mpls traffic-eng backup-path Tunnel9003
> > > mpls accounting experimental input
> > > mpls accounting experimental output
> > > mpls ip
> > > bfd interval 200 min_rx 200 multiplier 3
> > > service-policy input CORE_to_PE_Police_RT
> > > service-policy output PE_to_CORE_Police_RT
> > > ip rsvp bandwidth 1000000
> > > ip rsvp signalling hello
> > >
> > >
> > > Thanks,
> > > Terry
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Dec 31 2010 - 09:01:34 ART