Re: no 2 sub-interface in same dot1q : 7600 : HELP !!

Guarav,

It doesn't sound like you are doing anything wrong. You are dealing with
different platforms with different code base. ISR routers do many things in
software that don't exist on the 6500/7600 platform. Don't be surprised if
you can't take a config from an ISR and copy it to another platform.

Mark
#17755, Security

On Wed, Dec 15, 2010 at 2:19 AM, GAURAV MADAN <gauravmadan1177_at_gmail.com>wrote:

> Hi
>
> I am using a ISR / ISR-G2 .
> I have 2 ports G0/0 and G0/1
>
> I have following configuration
> ==========================
> !
> interface FastEthernet0/0.1
> encapsulation dot1Q 10
> ip vrf forwarding ONE
> ip address 20.0.0.1 255.0.0.0
> !
> interface FastEthernet0/0.2
> encapsulation dot1Q 20
> ip vrf forwarding TWO
> ip address 50.0.0.1 255.0.0.0
> !
> ===========
> !
> interface FastEthernet0/1.1
> encapsulation dot1Q 10
> ip vrf forwarding ONE
> ip address 10.0.0.1 255.0.0.0
> !
> interface FastEthernet0/1.2
> encapsulation dot1Q 20
> ip vrf forwarding TWO
> ip address 40.0.0.1 255.0.0.0
> !
>
>
> But I tried doing the same thing in c7600 chassis with a couple of
> ports of 6748.
> I am not able to give "encap dot1q 10 " on both Interface g13/16.1 and
> g13/17.1 .
>
> Can someone please let me know where am I wrong ?
>
> Thanks
> Gaurav Madan
>
> PS : I can share the topology on what I am trying to do . Please help .
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 15 2010 - 09:18:39 ART