Re: Passed the lab, some tips: "a week before the lab".

Rule number one: keep it simple.

For example:
OSPF, What's the command to get rid of Null0 when you summarize on ABR?
 ASBR?
I have some cards that I spend like 3-4 minutes answering the card in my
head, it's not the way it should be, if you need to SRS something complex -
break it into small pieces.

Rule number two: everything you don't know or not comfortable with must go
into you deck.

Rule number three: run Anki 2-3 times a day, when you get to the point where
you have 80+ cards to review per day - you'll understand.

On Tue, Dec 14, 2010 at 2:30 AM, Nadeem Rafi <nrafia_at_gmail.com> wrote:

> First of all congratulations on your success, its quite long journey. You
> have talked about Anki, can you shed some more light on the approach you
> used?
>
> Best Regards,
>
> On Tue, Dec 14, 2010 at 5:03 AM, Artem Nedoshepa <
> artem.nedoshepa_at_gmail.com> wrote:
>
>> First of all I want to say thank you guys, all and each of you contributed
>> in my number: CCIE#27705
>>
>> I'd like to share my "story".
>>
>> 1.5 months ago I took the lab in RTP and failed the TS but passed the
>> configs. I was so confident about the TS that I thought I'd have an hour
>> spare time. When I got to the 3rd ticket I realized that I'm going to need
>> that "spare hour". During the TS it felt like the clock was going 1.5
>> times
>> faster, no bathroom, no going to a breakroom. (in RTP the bathroom is kind
>> of far, not like in SJC - across the hole.) The config section took me
>> over
>> 5.5 hours, I had about 20 minutes to verify. All this 6 hours I was
>> worried
>> that I had only 8 tkt solved and most-likely some of them are incorrect,
>> but
>> I was trying to stay as positive as I could be. On the plane home overall
>> feeling was that I failed both sections, because I didn't have enough time
>> to verify the configs and not enough tickets solved. The next day I got
>> the
>> results and I was ready to see "FAIL".
>>
>> I booked the next attempt in 6 weeks in SJC since the RTP was booked until
>> February. I took it easy for a week or so, than started building a TS
>> scenarios with 30+ devices and all possible trouble tickets. A friend of
>> mine Charlie (who passed as well) and I used the approach : "To become a
>> criminal you must think like a criminal". You'll be surprised how much
>> you
>> can learn by "breaking" stuff for your buddy. So what we did is we made a
>> .net topology in dynamips with 30 + routers, put some preconfigs (basic
>> routing, BGP, MPLS etc..), we also included almost all possible "ip
>> services" and other "stuff" that you see on the blueprint. Each of us
>> made
>> 2 full TS scenarios for each other. By a "full TS scenarios" I mean 16+
>> tickets, and we made the tickets a bit harder that we experienced in the
>> lab. A week before the lab each of us had 2 "Super-sessions", 2 hours TS +
>> 6
>> hours configs, (let your friend to pick the lab for your, whichever vendor
>> you use). These "super-sessions" with harder that in reality TS helped a
>> lot (we did it twice with one day delay). I'd recommend not to touch the
>> keyboard 2 days before the lab.
>>
>> SJC, the TS session started, 10 minutes passed 2 or 3 tickets done, power
>> outage :), believe it or not, I didn't worried at all, I went and made
>> some
>> tea (another tip, don't drink coffee if you don't usually drink it, it
>> WON"T make you smarter/faster), went to the bathroom. It took the proctors
>> 20 minutes to fix the issue, we got lucky - the configs were saved but I
>> verified each solved ticket, just to make sure. I finished the TS with 30
>> minutes left. The clock was going 0.8 times slower this time, everything
>> was
>> like in a slow motion, I don't know maybe because our TS was too hardcore
>> than the real one. The config part was fun, went to the proctors like 20
>> times, it wasn't clear, looks like somebody from another planet wrote it.
>> (my first attempt the lab was very clear, I went to the proctor only 3-4
>> times). Before going to the proctor made 3 different versions of the
>> question in your head and be prepared to hear "I can't tell you it", "do
>> what the question says". Take a moment and really think how to rephrase
>> the
>> same question, show the proctor that you know the "stuff" and you just
>> need
>> some small details to make the right decision.
>>
>> For preparation I used 4x3550 and dynamips, I made a little blog about it
>> ccie4you.info , for stuff that don't work on 3550 or Dynamips rented a
>> real
>> rack a couple of times. Use SRS twice a day, I used Anki, so far it's the
>> best I've seen. (My anki deck has like 1300 cards).
>>
>>
>> Again, thank you all.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Dec 14 2010 - 09:07:21 ART