RE: ASA Easy VPN access problem

Thanks for replying me..

My point is how can I allow only a certain IPs or Subnet (Public IPs) to be
accepted as a remote VPN users?

For Example Suppose you have an Public ip "1.1.1.1" and I have IP address
"2.2.2.2", both you and I initiating a Remote VPN access, but the ASA
firewall will grant you access while dropping me.

Best Regards,

==============================

Mahmoud Nossair

From: Shaughn Smith [mailto:maniac.smg_at_gmail.com]
Sent: Monday, December 13, 2010 9:52 AM
To: Mahmoud Nossair
Cc: ccielab_at_groupstudy.com
Subject: Re: ASA Easy VPN access problem

I dont see the point. Only users who succesfully authenticate can gain
access via the VPN. What Auth method are you using, radius, tacacs+, Local
etc

CCIE # 23962 (SP)

On Mon, Dec 13, 2010 at 8:26 AM, Mahmoud Nossair <mahmoud.nossair_at_gmail.com>
wrote:

Dear Experts

I had configured an Easy VPN access to the Cisco ASA 5520, but the problem
is anybody from the OUTSIDE can initiate a remote VPN access.

So how can restrict the access to only a HOST or IP subnet from the OUTSIDE
interface? (i.e nobody can initiate a remote VPN access unless explicitly
permitted through an access list or any method elese).

Best Regards,

==============================

Mahmoud Nossair

CCIE network Engineer.

Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
Received on Mon Dec 13 2010 - 10:54:43 ART