RE: How to COMPLETE the END - TO - END LSP btw non-directly

> Dear All,
> I have tried my luck but I am forced to drop the below scnerio in whcih we
> have inter-as VPN but the ASBR's are not directly connected ?
> Can any one help , I am having my brains lost with this scenerio ?
>
> R8---------R9-----------------R6--------------------R2
> | |
|
> | | |
> | |
|
> | | |
> R4 R5
R3
>
> R8 and R9 are both in same AS 789 and are Mp-BGP neighbors.
> R8 and R4 are PE-CE in vrf ABC-1 & R9 and R5 as PE-CE as ABC-2
> R6 is in AS66 and its ipv4 ebgp peered with R9 and R2.
>
> R4 and R5 can reach each other routes since the LSP is complete.
>
> We have another AS22 on R2 with R3 as in vrf ABC-3.
> R2 is MP-BGP Vpnv4 peered with R8. R3 can see the routes in its routing
table
> for both the cites ABC-1 and ABC-2 from R4 and R5 vice versa.
> But when tried to ping , there is a failure because of the incomplete LSP.
> The problem is to complete the LSP between the R2 and its Vpnv4 ebgp peer
R8.
>
> *I tried runnin LDP between R6-R9 and R6-R2 but no use since there is no
> IGP btw R9/R6/R2 so that LDP cannot generate the labels for the end-to-end
> LSP
>
> *I tried running BGP labels by mentioning the BGP send-label to the ipv4
> ebgp neibors R6-R2 and R6-R9 but the EBGP VPNv4 peering btw R2 & R8
break
> when I do this ?
>
>* I even tried configuring GRE Tunnel between R2 and R8 and ran MPLS on it ,
but the tunnel comes up and then goes down after 10 secs, message comes saying
> tunnel turned down because o recursive lookup.

>
> Waiting for the experts FEEDBACK :)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Dec 04 2010 - 05:18:12 ART