Re: Cisco 881

Hi David, any form of queueing and shaping is an outbound feature and
must be applied in an outbound direction on an interface, you may want
to consider policing for inbound connections.

On 11/16/10, David Prall <dcp_at_dcptech.com> wrote:
> Fast0 - 3 are all switchports. Fast4 is a routed interface where you can do
> real QoS configuration. There are a number of tricks that can be done to do
> QoS for the switchports, just not on them.
>
> David
>
> --
> http://dcp.dcptech.com
>
>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Edouard Zorrilla
>> Sent: Tuesday, November 16, 2010 5:43 PM
>> To: ccielab_at_groupstudy.com
>> Subject: Cisco 881
>>
>> Hello Guys,
>>
>> I have a Cisco 881 and I want to set up a b service-policy input
>> limit-httpb and b service-policy output limit-httpb on F2 so that I
>> can
>> limit the bandwidth on both ways.
>>
>>
>> Test118.108(config-if)#service-policy input http-limit
>> Weighted Fair Queueing feature not supported in input policy.
>> Bandwidth command not allowed at parent level in input direction
>> Test118.108(config-if)#
>>
>> Do you know if there is a way to do that so that I can limit inbound
>> and
>> outbound bandwidth ?.
>>
>> Thanks.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sent from my mobile device
Warm Regards,
Eseosa
CCIE #23782
You can learn anything just develop the right quantity of interest.
Blogs and organic groups at http://www.ccie.net