its easy....
On R1
ip default-network 2.2.0.0
Cheers
Sara
On Fri, Nov 5, 2010 at 9:34 PM, Narbik Kocharians <narbikk_at_gmail.com> wrote:
> I will be teaching for the next few weeks, so I will not post any puzzle
> till I get back. Have fun.
>
>
>
> R1 (F0/0 10.1.1.1 /24) ----------------------------------- (10.1.1.2 /24
> F0/0) R2
>
>
>
> The two routers are running Eigrp, let s say in AS 100.
>
>
>
> Configure the following Loopback interface on R1
>
> Loopback 1 - 2.2.2.2 255.255.0.0
>
>
>
>
>
> R1 should advertise this Loopback such that R2 sees the route as an
> external
> route.
>
> R1 MUST redistribute static to make this happen.
>
>
> DO NOT configure a static route on R1.
> DO NOT configure R2 at all.
> NO EEM, NO route-maps, NO ACLs or Prefix-lists.
> --
> *Narbik Kocharians
> *CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining.com <http://www.micronicstraining.com/> <
> http://www.micronicstraining.com/>
> Sr. Technical Instructor
> *Ask about our FREE Lab Voucher with our Boot Camps*
> YES! We take Cisco Learning Credits!
> Training & Remote Racks available
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sat Nov 06 2010 - 21:32:33 ART
This archive was generated by hypermail 2.2.0 : Sun Dec 05 2010 - 22:14:55 ART