Re: MPLS TE ( Affinity)

Does it make a difference if i will use different values?

Regards,
Gaurav

On Wed, Nov 3, 2010 at 9:44 AM, Gaurav Thukral <pearlgaurav_at_gmail.com>wrote:

> Yeah i am working on Dynamips and same affinity value is set on both
> directions.
>
> Regards,
> Gaurav
>
>
>
> On Wed, Nov 3, 2010 at 9:41 AM, Tyson Scott <tscott_at_ipexpert.com> wrote:
>
>> And you have the same affinity configuration in the opposite direction?
>> Is this dynamips?
>>
>>
>>
>> Regards,
>>
>>
>>
>> Tyson Scott - CCIE #13513 R&S, Security, and SP
>>
>> Managing Partner / Sr. Instructor - IPexpert, Inc.
>>
>> Mailto: tscott_at_ipexpert.com
>>
>> Telephone: +1.810.326.1444, ext. 208
>>
>> Live Assistance, Please visit: www.ipexpert.com/chat
>>
>> eFax: +1.810.454.0130
>>
>>
>>
>> IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
>> Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
>> CCIE (R&S, Voice, Security & Service Provider) certification(s) with
>> training locations throughout the United States, Europe, South Asia and
>> Australia. Be sure to visit our online communities at
>> www.ipexpert.com/communities and our public website at www.ipexpert.com
>>
>>
>>
>> *From:* Gaurav Thukral [mailto:pearlgaurav_at_gmail.com]
>> *Sent:* Tuesday, November 02, 2010 11:55 PM
>> *To:* Tyson Scott
>> *Subject:* Re: MPLS TE ( Affinity)
>>
>>
>>
>> From the Opposite direction tunnel is UP.
>>
>> Regards,
>> Gaurav
>>
>> On Wed, Nov 3, 2010 at 9:21 AM, Gaurav Thukral <pearlgaurav_at_gmail.com>
>> wrote:
>>
>> I have checked all these. After Removing the following configuration
>> Tunnel become up.
>>
>> RSVP & MPLS TE is enable on all the links.
>>
>>
>>
>> interface Ethernet3/0
>> mpls traffic-eng attribute-flags 0x11
>>
>> int tunnel 89
>>
>>
>> tunnel mpls traffic-eng affinity 0x11 mask 0x11
>>
>> Regards,
>> Gaurav
>>
>>
>>
>>
>>
>>
>> On Wed, Nov 3, 2010 at 9:14 AM, Tyson Scott <tscott_at_ipexpert.com> wrote:
>>
>> If you remove the affinity configuration does the tunnel come up? You
>> have
>> the tunnel set to dynamic learning mode are you sure you have traffic
>> engineering and RSVP configured on the entire path? You haven't given
>> much
>> detail about what steps you have taken to troubleshoot the issue. Are the
>> traffic engineering tunnels working from the opposite direction? A good
>> step to take is often to look at the basics, make sure they work, then add
>> the attribute control.
>>
>> Regards,
>>
>> Tyson Scott - CCIE #13513 R&S, Security, and SP
>> Managing Partner / Sr. Instructor - IPexpert, Inc.
>> Mailto: tscott_at_ipexpert.com
>>
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Gaurav Thukral
>> Sent: Tuesday, November 02, 2010 11:27 PM
>> To: Group study; Wayne Lawson; groupstudy_at_cconlinelabs.com
>> Subject: MPLS TE ( Affinity)
>>
>> Hi Guys,
>>
>> I have Configured the following configuration on Head end router. One of
>> ths
>> interface configuration is also given.
>>
>> interface Tunnel89
>> ip unnumbered Loopback2
>> tunnel destination 5.5.99.9
>> tunnel mode mpls traffic-eng
>> tunnel mpls traffic-eng priority 7 7
>> tunnel mpls traffic-eng bandwidth sub-pool 5000
>> tunnel mpls traffic-eng affinity 0x11 mask 0x11
>> tunnel mpls traffic-eng path-option 1 dynamic
>>
>> interface Ethernet3/0
>> mpls traffic-eng attribute-flags 0x11
>>
>> AS i know that Tunnel should pass over the link if
>>
>> Tunnel Affinity = Link Affinity X Tunnel Mask
>>
>> But My Tunnel is down. Please Tell me if i am doing some wrong
>> configuration.
>>
>> Regards,
>> Gaurav
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 03 2010 - 09:48:08 ART