Re: Dynagen/dynamip simulation not working

Just a reminder...

If you are not running 64 bit, the distribution is limited to 1.5 Gig per
instance for windows and 3 Gig per instance on Linux or Unix. You should
always provide enough RAM that the image requires. It may work with less in
some circumstances but I would not roll the dice on that one.

Paul

-- 
Paul Negron
CCIE# 14856 CCSI# 22752
Senior Technical Instructor
www.micronicstraining.com
> From: Ccieyarub <ccieyarub_at_gmail.com>
> Reply-To: Ccieyarub <ccieyarub_at_gmail.com>
> Date: Mon, 1 Nov 2010 11:46:21 -0400
> To: Ccieyarub <ccieyarub_at_gmail.com>
> Cc: Jason Boyers <jboyers_at_ipexpert.com>, "<ccielab_at_groupstudy.com>"
> <ccielab_at_groupstudy.com>
> Subject: Re: Dynagen/dynamip simulation not working
> 
>   Hi all
> 
> I'm trying to run a simulation from ccie ISP trainning site ospf LSA
> example in
> Www.Ccie18473.net/dynamips
> This is a simulation of 6 routers c7200 and when I start all routers
> with the ram=64 megs as mentioned in the .net file , all the routers
> came up without any problem,  but when  I try to telnet to any of the
> six routers , the telnet to the console of this router will stop in
> the first message
> " connected to dynamip VM R1 (ID 5, type 7200) - Console port.
> So all the routers did not continue their booting and I can not access
> the CLI of any router
> 
> - now I tried simpler simulation with only 2 routers but ram=64  and
> still the console is frozen with the same message as above
> - if I changed ram=256 with 2 routers things works fine
> If I have ram=256 with 6 routers I'm getting an error from dynamip on
> the third router loading Exception violation STATUS ACCESS VIOLATION
> and all tge simulation will stop completely
> I have Four gig ram dual core in xp which I was told lots of ram
> 
> Thanks so much
> Bert
> 
> 
> Sent from my iPhone
> 
> On 2010-11-01, at 11:41 AM, Ccieyarub <ccieyarub_at_gmail.com> wrote:
> 
>> Hi all
>> 
>> I'm trying to run a simulation from ccie ISP trainning site ospf LSA
>> example in
>> Www.Ccie18473.net/dynamips
>> This is a simulation of 6 routers c7200 and when I start all routers
>> with the ram=64 megs as mentioned in the .net file , all the routers
>> came up without any problem,  but when  I try to telnet to any of
>> the six routers , the telnet to the console of this router will stop
>> in the first message
>> " connected to dynamip VM R1 (ID 5, type 7200) - Console port.
>> So all the routers did not continue their booting and I can not
>> access the CLI of any router
>> 
>> - now I tried simpler simulation with only 2 routers but ram=64  and
>> still the console is frozen with the same message as above
>> - if I changed ram=256 with 2 routers things works fine
>> I  don't have this problem when I m running the simulation with 2
>> routers and with ram=128
>> Sent from my iPhone
>> 
>> On 2010-11-01, at 10:58 AM, "Jason Boyers" <jboyers_at_ipexpert.com>
>> wrote:
>> 
>>> I guess the question is this: what function are you looking for?
>>> Each
>>> vendor has their own strengths and weaknesses (though I prefer
>>> Cisco!)  If
>>> you explain what you are trying to do, then we can provide a better
>>> response.
>>> 
>>> Jason Boyers - CCIE #26024 (Wireless)
>>> Technical Instructor - IPexpert, Inc.
>>> Mailto: jboyers_at_ipexpert.com
>>> 
>>> 
>>> -----Original Message-----
>>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
>>> Behalf Of
>>> Anthony Faria
>>> Sent: Monday, November 01, 2010 10:52 AM
>>> To: Bilal Hansrod
>>> Cc: Hussam EL Kebbi; <ccielab_at_groupstudy.com>
>>> Subject: Re: Which vendor is equivalant to Cisco WLC 4404?
>>> 
>>> I wouldn't say head to head. It is cheaper but you get what you pay
>>> for.
>>> 
>>> Tony
>>> 
>>> On Mon, Nov 1, 2010 at 12:28 AM, Bilal Hansrod
>>> <bilal.hansrod_at_gmail.com>wrote:
>>> 
>>>> Aruba is head to head with Cisco in enterprise wireless solution,
>>> offcourse
>>>> cheaper.
>>>> 
>>>> Thanks & Regards,
>>>> Bilal Hansrod
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>> 
>>>> 
>>>> On 01/11/2010, at 5:48 PM, Hussam EL Kebbi <hussamkibbi_at_hotmail.com>
>>>> wrote:
>>>> 
>>>> Hi Experts,
>>>>> 
>>>>> What equipment can do same function as Cisco WLC?
>>>>> 
>>>>> Thanks
>>>>> 
>>>>> 
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>> 
>>>>> _______________________________________________________________________
>  
> 
>> 
>>>>> 
>>>> 
>>>> 
>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>> 
>>>> 
>>>> 
>>>> Blogs and organic groups at http://www.ccie.net
>>>> 
>>>> _______________________________________________________________________
>  
> 
>> 
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>> 
>>> 
>>> Blogs and organic groups at http://www.ccie.net
>>> 
>>> _______________________________________________________________________
>  
> 
>> 
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>> 
>>> 
>>> Blogs and organic groups at http://www.ccie.net
>>> 
>>> _______________________________________________________________________
>  
> 
>> 
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
> 
> 
> Blogs and organic groups at http://www.ccie.net
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net