RE: HWIC-3G-GSM Module Configration Problem...need help

Hello Muhhammad,

If you have a Pin Code, unlock sim using "Cellular 0/1/0 gsm sim unlock <PIN Code>" , then you can use following debug commands for further investigation "debug chat ", "debug ppp negotiation", "debug ppp authentication"

Regards,
Erdem

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of muhammad adnan
Sent: Saturday, October 30, 2010 3:06 PM
To: ccielab_at_groupstudy.com
Subject: HWIC-3G-GSM Module Configration Problem...need help

Dear Group members:-
                                 i am trying to configure the 3G-module.i
have inserted my sim card into the HWIC module sim card properly working in
the phone and i am accessing the internet.
but when i configure HWIC module accordingly i am unable to access the
internet my configration pasted below if any experience person guid me
little.

in my phone i just put APN and it work fine without Authentication *Service
provider ask me* that the *username and password is blank..*

country Libya
GSM service provider =Almadar
APN or access point name =almadar.net

*Router#show cellular 0/1/0 profile
Profile 1 = INACTIVE*
--------
PDP Type = IPv4
Access Point Name (APN) = almadar.net
Authentication = None
Username: , Password:

 * - Default profile
*
--------------------------------------------------------------------------------------
*Router config*:
*
!
!
!
multilink bundle-name authenticated
!
chat-script gsm "" "ATDT*99*1#" TIMEOUT 60 "CONNECT"
!
!
!
!
interface Loopback0
 ip address 10.0.0.1 255.255.255.0
!
interface Wlan-GigabitEthernet0/0
 description Internal switch interface connecting to the embedded AP
!
interface GigabitEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface wlan-ap0
 description Service module interface to manage the embedded AP
 no ip address
 arp timeout 0
 no mop enabled
 no mop sysid
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface ATM0/0/0
 no ip address
 shutdown
 no atm ilmi-keepalive
!
interface Cellular0/1/0
 ip address negotiated
 encapsulation ppp
 dialer in-band
 dialer idle-timeout 30
 dialer string gsm
 dialer-group 1
 async mode interactive
 ppp ipcp dns request
!
interface Vlan1
 no ip address
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
!
access-list 1 permit any
dialer-list 1 protocol ip list 1
!
!
!
control-plane
!
!
line con 0
line aux 0
line 0/1/0
 exec-timeout 0 0
 script dialer gsm
 login
 modem InOut
 no exec
 speed 80000
line 67
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
 login
!
scheduler allocate 20000 1000
end*

kindly Guid me

Blogs and organic groups at http://www.ccie.net
Received on Sat Oct 30 2010 - 15:34:16 ART