Re: VLAN-based EoMPLS

Hi,

Could you give following details

On both PEs:
show mpls l2 vc detail
sh run int <int connected to CE>

On both CEs:
sh run int <int connected to PE>

Thanks,
Srinivas

On Wed, Oct 27, 2010 at 5:00 PM, Manaf Al Oqlah <manafo_at_hotmail.com> wrote:

> Hi,
>
> I have established an EoMPLS circuit on ME3750 switches as below.
> everything
> seems to be working fine as my virtual circuit is UP
> but my problem is that I cant ping IP address CE02 from CE01
>
> PC01---CE01---PE01---PE02---CE02---PC02
>
> I have applied the following configuration on PE01 & PE02 ES ports
>
> interface loopback 0
> ip address 1.1.1.1 255.255.255.255
> !
> interface GigabitEthernet1/1/1
> description to PE02
> ip address 10.0.0.1 255.255.255.252
> mpls ip
> !
> interface GigabitEthernet1/1/2
> description to CE01
> switchport mode access
> switchport access vlan 100
> !
> vlan 100
> !
> interface vlan 100
> xconnect 2.2.2.2 100 encapsulation mpls
>
> where could me my problem!
>
> Regards,
> Manaf Al Oqlah
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 27 2010 - 17:12:19 ART