RE: Missing: service password-recovery

Be aware that there is a bug in a few versions of code that the break
sequence 5 seconds after the loading of the image doesn't work. So if you
enable this feature and forget the password you are going to be wasting some
time recovering the system. Personally simply doing a description on an
interface with the command you would enter would typically be the better
path to take so that it shows you know what you are doing but not making the
next student on the rack have some major pains.

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Managing Partner / Sr. Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Jeferson Guardia
Sent: Sunday, October 24, 2010 6:27 PM
To: Jack Router; bob_at_bobsinclair.net; ccielab_at_groupstudy.com
Subject: Re: Missing: service password-recovery

I ran thru the same today. Let me guess, you are doing Narbik vol 2,
security, lab #1

:)

On 10/24/10, Jack Router <pan.router_at_gmail.com> wrote:
> Thanks, so this is a hidden command. Should have tried that J
>
>
>
> It says :
>
> R1(config)#no service password-recovery
>
> Password recovery disable mode is not supported by the
>
> current ROMMON.
>
> Please upgrade the ROMMON if you want to use this feature.
>
>
>
> but this is dynagen problem .
>
>
>
> From: Bob Sinclair [mailto:bob_at_bobsinclair.net]
> Sent: 24-Oct-10 15:52
> To: 'Jack Router'; ccielab_at_groupstudy.com
> Subject: RE: Missing: service password-recovery
>
>
>
> Hi Jack,
>
> The feature navigator claims that your IOS does support the feature. I
> notice that on my 2811 it is not available in the help, but it does take
the
> command. Have you tried that?
>
>
> R1(config)#no service password?
> password-encryption
>
> R1(config)#no service password-recovery
> WARNING:
> Executing this command will disable password recovery me
> chanism.
> Do not execute this command without another plan for
> password recovery.
>
> Are you sure you want to continue? [yes/no]: yes
>
> R1(config)#do sh run | inc password-recovery
> no service password-recovery
> R1(config)#
> R1(config)#service password-recovery ?
> % Unrecognized command
> R1(config)#service password-recovery
> R1(config)#do sh run | inc password-recovery
> R1(config)# [no output since this is the default]
>
> HTH,
>
> Bob Sinclair CCIE 10427 CCSI 30427
> CIERS2 Online Instructor
> www.tinyurl.com/ciers2online
>
>
>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Jack Router
>> Sent: Sunday, October 24, 2010 3:18 PM
>> To: ccielab_at_groupstudy.com
>> Subject: Missing: service password-recovery
>>
>> Commands service password-recovery, Security passwords min-length are
>> missing in my IOS. I use "3700 Software (C3725-ADVENTERPRISEK9-M),
>> Version
>> 12.4(25), RELEASE SOFTWARE (fc2)"
>>
>> Do I need other release to get tose commands ?
>>
>> Thanks,
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.862 / Virus Database: 271.1.1/3216 - Release Date:
>> 10/24/10 02:34:00
>
> _____
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1144 / Virus Database: 422/3216 - Release Date: 10/24/10
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sent from my mobile device
Blogs and organic groups at http://www.ccie.net