Re: OER master error

Ohhh... it's a shame..... thanks :(

On Sat, Oct 23, 2010 at 3:57 PM, Bobola Oke <okebobola_at_gmail.com> wrote:

> hi Sara, this is a typo...
> IF Serial*s*0/0
>
> the interface is invalid, use serial0/0 instead
>
>
> On Sat, Oct 23, 2010 at 6:51 AM, Sarad <tosara_at_gmail.com> wrote:
>
>> Hi Experts,
>>
>> I was doing a INE lab on OER. I wanted to configure R2 as master &
>> R2,R3,R5
>> as boarder routers. Configuration is as follows. Everything is fine other
>> than 1 problem that is I can not add the Serial 0/0 interface of the R5 as
>> an internal interface. It gives an error saying invalid interface.
>>
>> **
>> *R2 configuration*
>>
>> oer master
>> logging
>> !
>> border 150.1.3.3 key-chain OERKEY
>> interface Serial1/0.1 internal
>> interface Serial1/2 external
>> interface Serial1/3 internal
>> interface FastEthernet0/0 external
>> !
>> border 150.1.2.2 key-chain OERKEY
>> interface Serial0/0.1 internal
>> interface Serial0/1 internal
>> interface FastEthernet0/0 external
>> !
>> border 150.1.5.5 key-chain OERKEY
>> interface Serials0/0 internal
>> interface FastEthernet0/0 internal
>> interface Serial0/1 external
>> !
>> oer border
>> local Loopback0
>> master 150.1.2.2 key-chain OERKEY
>>
>>
>>
>>
>>
>> *R 3 - R5 configuration*
>>
>> oer border
>> local Loopback0
>> master 150.1.2.2 key-chain OERKEY
>> !
>>
>>
>>
>> *R5 verification*
>>
>> Rack1R5#sh oer border
>> OER BR 150.1.5.5 ACTIVE, MC 150.1.2.2 UP/DOWN: UP 00:03:01,
>> Auth Failures: 0
>> Conn Status: SUCCESS, PORT: 3949
>> Exits
>> Fa0/0 INTERNAL
>> Se0/1 EXTERNAL
>>
>> *R3 verification*
>>
>> Rack1R3#sh oer border
>> OER BR 150.1.3.3 ACTIVE, MC 150.1.2.2 UP/DOWN: UP 00:39:17,
>> Auth Failures: 0
>> Conn Status: SUCCESS, PORT: 3949
>> Exits
>> Fa0/0 EXTERNAL
>> Se1/0.1 INTERNAL
>> Se1/2 EXTERNAL
>> Se1/3 INTERNAL
>>
>>
>> *Error I am getting when adding interface s0/0*
>>
>> Rack1R2(config-oer-mc)#border 150.1.5.5 key-chain OERKEY
>> Rack1R2(config-oer-mc-br)#interface Serials0/0 internal
>> *Mar 1 01:19:08.135: %OER_MC-5-NOTICE: BR 150.1.5.5 IF Serials0/0 Invalid
>>
>>
>> I tried many times removing & putting configuration back, debugging & some
>> show commands, But coudnt figure out. Dont know whether something to do
>> with
>> GNS3.
>>
>> Thanks in advance
>>
>> Sara
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Bobola Oke

Blogs and organic groups at http://www.ccie.net
Received on Sat Oct 23 2010 - 22:43:55 ART