Re: VOIP: corlist issue ?

FTR, the problem seems not to lie where I thought.
Corlists work fine, BUT (yes, big but) incoming dialpeer selection
does not do what one (me at least) would expect!

ephone-dns generate dinamic dialpeers 200xx, with voice ports 50/0/xx.
If you dial from line y on phone z that corresponds to ephone-dn xx,
I would expect the incoming dialpeer to be 200xx, but oops, that's not
the case.

If you find which dial-peer is being used and put corlist there, it
works. Now I only need a way to fix incoming dialpeer to the right
ephone-dn...

(Missbehaviour aka bug present in 12.4(9)T7 and 12.4(24)T4)
-Carlos

Carlos G Mendioroz @ 20/10/2010 17:20 -0300 dixit:
> The issue is the missbehaviour of corlists, I guess.
> If they worked as advertized, the config should behave as intended.
> dial-peers created at phone registration should inherit ephone-dn
> properties. They do get corlist incoming, but fail to get corlist
> outgoing ?
>
> How do you prevent a lobby phone from being able to call the CEO ?
>
> -Carlos
>
>
> Adel Abouchaev @ 20/10/2010 17:04 -0300 dixit:
>> I don't think this will ever be stable if set up this way. Every time a
>> phone is registered, a dial peer is created. Since 911 is a shared number
>> between those phones (and not even the same ephone-dn), then it's a
>> matter
>> of the sequence of registration which phone will ring for 911 call.
>> What is the task? To create a PSTN that will work for multiple pods?
>> Why not
>> to set up separate numbers for 911 and do prefix add in/prefix remove
>> out by
>> applying translation profiles on voice ports towards each pod? 1911,
>> 2911,
>> 3911, etc. for as many controllers you may have there? Then each site
>> will
>> call its own 911 and its representation on PSTN phone would matter
>> less for
>> this case.
>>
>> HTH,
>>
>> Adel
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
>> Of Ryan
>> West
>> Sent: Wednesday, October 20, 2010 6:17 AM
>> To: Jose Orfao; Carlos G Mendioroz
>> Cc: Nick Matthews; Cisco certification
>> Subject: RE: VOIP: corlist issue ?
>>
>> How does this stop calling between phones?
>>
>> -ryan
>>
>> From: Jose Orfao [mailto:jmorfao_at_gmail.com]
>> Sent: Wednesday, October 20, 2010 9:16 AM
>> To: Carlos G Mendioroz
>> Cc: Nick Matthews; Ryan West; Cisco certification
>> Subject: Re: VOIP: corlist issue ?
>>
>> Hi guys try this one maybe it can work for you, it did for me
>>
>>
>> dial-peer cor custom
>> name INTERNAL
>> name EMERGENCY
>> name LOCAL
>> name NATIONAL
>> name CELLULAR
>> name INTERNATIONAL
>> !
>> !
>> dial-peer cor list call-Internal
>> member INTERNAL
>> !
>> dial-peer cor list call-Emergency
>> member EMERGENCY
>> !
>> dial-peer cor list call-Local
>> member LOCAL
>> !
>> dial-peer cor list call-National
>> member NATIONAL
>> !
>> dial-peer cor list call-Cellular
>> member CELLULAR
>> !
>> dial-peer cor list call-International
>> member INTERNATIONAL
>> !
>> dial-peer cor list GROUP1
>> member INTERNAL
>> member EMERGENCY
>> !
>> dial-peer cor list GROUP2
>> member INTERNAL
>> member EMERGENCY
>> member LOCAL
>> !
>> dial-peer cor list GROUP3
>> member INTERNAL
>> member EMERGENCY
>> member LOCAL
>> member NATIONAL
>> !
>> dial-peer cor list GROUP4
>> member INTERNAL
>> member EMERGENCY
>> member LOCAL
>> member NATIONAL
>> member CELLULAR
>> !
>> dial-peer cor list GROUP5
>> member INTERNAL
>> member EMERGENCY
>> member LOCAL
>> member NATIONAL
>> member CELLULAR
>> member INTERNATIONAL
>> !
>>
>> dial-peer voice 1 pots
>> trunkgroup POTS
>> corlist outgoing call-Emergency
>> description Emergency
>> destination-pattern 1....
>> forward-digits 5
>> !
>> dial-peer voice 2 pots
>> trunkgroup POTS
>> corlist outgoing call-Emergency
>> description Toll_Free
>> destination-pattern 0800T
>> forward-digits 10
>> !
>> dial-peer voice 3 pots
>> trunkgroup POTS
>> corlist outgoing call-Local
>> description Local_Toll
>> destination-pattern 086T
>> forward-digits 10
>> !
>> dial-peer voice 4 pots
>> trunkgroup POTS
>> corlist outgoing call-Local
>> description Local
>> destination-pattern 011.......
>> forward-digits 10
>> !
>> dial-peer voice 5 pots
>> trunkgroup POTS
>> corlist outgoing call-National
>> description National
>> destination-pattern 0[123456][1-9].......
>> forward-digits 10
>> !
>> dial-peer voice 6 pots
>> trunkgroup POTS
>> corlist outgoing call-Cellular
>> description Cellular
>> service clid_authen_collect
>> destination-pattern 0[78][1234689].......
>> forward-digits 10
>> !
>> dial-peer voice 7 pots
>> trunkgroup POTS
>> corlist outgoing call-International
>> description International
>> destination-pattern 00T
>> forward-digits all
>> !
>> dial-peer voice 8 voip
>> corlist incoming call-Internal
>> corlist outgoing call-Internal
>> destination-pattern 2..
>> !
>>
>> !
>> ephone-dn 1 dual-line
>> number 201
>> pickup-group 1
>> label Fatima
>> description EXT 201
>> name Fathima
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP5
>> !
>> !
>> ephone-dn 2 dual-line
>> number 202
>> label 202
>> description Sheigh's Study
>> name Sheigh's Study
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP5
>> !
>> !
>> ephone-dn 3 dual-line
>> number 203
>> label Line
>> description Reception
>> name Reception
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP4
>> night-service bell
>> !
>> !
>>
>> ephone-dn 6 dual-line
>> number 206
>> label 206
>> description Children's Home
>> name Children's Home
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP1
>> !
>> !
>> ephone-dn 7 dual-line
>> number 207
>> pickup-group 5
>> label 207
>> description Moulana's Office
>> name Moulana's Office
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP4
>> !
>> !
>> ephone-dn 8 dual-line
>> number 213
>> pickup-group 5
>> label 213
>> description Naeem
>> name Naeem
>> call-forward busy 5000
>> call-forward noan 5000 timeout 30
>> corlist incoming GROUP4
>> !
>>
>>
>>
>> Good Luck
>>
>>
>>
>>
>> On Wed, Oct 20, 2010 at 2:17 PM, Carlos G Mendioroz
>> <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>> wrote:
>> Nick,
>> do you know any trick to configure an explicit dial-peer for an
>> ephone-dn ?
>> I'm out of luck with all the things I've tried.
>> AFAIK, corlist outgoing is not working with ephone-dns in this IOS
>> version
>> (12.4(9)T7)
>>
>> -Carlos
>>
>> Nick Matthews @ 19/10/2010 23:41 -0300 dixit:
>> I skipped through the config a bit fast and didn't see it on the
>> ephone-dn.
>> I would agree that in theory this would work.
>>
>> The problem I would see here is that I don't know if corlist outgoing was
>> ever fully utilized on a ephone-dn. 100% of the corlist implementations
>> I've seen on the ephone-dn is on the incoming corlist to adjust the
>> outgoing
>> call, and not the incoming call to the phone.
>>
>> I would play with it and apply the same corlist to an incoming dial
>> peer to
>> a phone and see if that works. It may be a CME bug, but I wasn't able to
>> find any known issues.
>>
>> Hope this helps a bit.
>>
>> -nick
>>
>> On Tue, Oct 19, 2010 at 9:44 PM, Carlos G Mendioroz
>> <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>>wrote:
>> Nick,
>> as far as I can tell, the example I sent has corlist at the ephone-dns.
>> And I don't know how to apply it to the ephone. Would you please share
>> a working config that would enable tennant like functionality ?
>> I.e. phone 1 only rings phone 1 for a dn number that is also present
>> in phone 2, and vice versa.
>>
>> Thanks,
>> -Carlos
>>
>> Nick Matthews @ 19/10/2010 20:14 -0300 dixit:
>> You have to apply the corlist on the ephone (or ephone-dn) in order for
>> it to do anything. The 1st rule of corlist is..
>> Both the incoming and outgoing dial peer have to have a corlist
>> statement in order for any cor rule to take effect.
>>
>> -nick
>>
>>
>>
>> On Tue, Oct 19, 2010 at 12:05 PM, Carlos G Mendioroz
>> <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>
>> <mailto:tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>>> wrote:
>>
>> Well, as the call goes to a DN of a line, the (outgoing) dial-peer
>> is implicit (CME). The goal is to do tennant like functionality
>> and have phone-1 only see pod-1 dial-peers, and phone-2 only see
>> pod-2's.
>>
>> What I sent was a minimal example config showing the issue.
>> Nor inout nor ephone detail show any cor related info.
>> :(
>>
>>
>> Ryan West @ 19/10/2010 12:55 -0300 dixit:
>>
>> Carlos,
>>
>> Usually COR lists are applied outgoing on dial-peers and
>> incoming on DN's. You might try 'debug voip ccapi inout' and
>> 'debug ephone detail' to figure out the issue.
>>
>> -ryan
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>
>> <mailto:nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>>
>> [mailto:nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>
>> <mailto:nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>>] On
>> Behalf Of Carlos G Mendioroz
>> Sent: Tuesday, October 19, 2010 11:36 AM
>> To: Cisco certification
>> Subject: VOIP: corlist issue ?
>>
>> Hey there,
>> it might be me, but given this config:
>>
>> ...
>> dial-peer cor custom
>> name Pod-1
>> name Pod-2
>> !
>> !
>> dial-peer cor list Pod-1
>> member Pod-1
>> !
>> dial-peer cor list Pod-2
>> member Pod-2
>>
>> ...
>> ephone-dn 11
>> number 5551000
>> label Local
>> description PSTN-Phone-1
>> corlist incoming Pod-1
>> corlist outgoing Pod-1
>> !
>> !
>> ephone-dn 12
>> number 911
>> label Emergency
>> corlist incoming Pod-1
>> corlist outgoing Pod-1
>> !
>> !
>> ephone-dn 21
>> number 5551000
>> label Local
>> description PSTN-Phone-2
>> corlist incoming Pod-2
>> corlist outgoing Pod-2
>> !
>> !
>> ephone-dn 22
>> number 911
>> label Emergency
>> corlist incoming Pod-2
>> corlist outgoing Pod-2
>> !
>> !
>> ephone 1
>> device-security-mode none
>> description PSTN-Phone-1
>> mac-address 001D.45B5.FF33
>> type 7961
>> button 1:11 2:12
>> !
>> !
>> !
>> ephone 2
>> device-security-mode none
>> description PSTN-Phone-2
>> mac-address 001D.4595.B533
>> type 7961
>> button 1:21 2:22
>> ...
>>
>> If you pick phone-2 line 1 and you dial "911" it should ring
>> phone-2 line 2, ok ? But it rings phone-1.
>>
>> Any known issues with cor lists and CME ?
>> TIA,
>> -Carlos
>>
>>
>> --
>> Carlos G Mendioroz <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>
>> <mailto:tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>>>
>> LW7 EQI Argentina
>>
>>
>> Blogs and organic groups at
>> http://www.ccie.net<http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>> Carlos G Mendioroz <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>
>> <mailto:tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>>>
>> LW7 EQI Argentina
>>
>>
>> Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>> --
>> Carlos G Mendioroz <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>> LW7 EQI
>> Argentina
>>
>>
>> Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>> --
>> Carlos G Mendioroz <tron_at_huapi.ba.ar<mailto:tron_at_huapi.ba.ar>> LW7 EQI
>> Argentina
>>
>>
>> Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net