Re: Outsde to inside

Well Sameer, you can do it in several ways, for instance using a permit any,
any.

The easiest way:
a)Allow non nated traffic from inside to outside(NO NAT-CONTROL privilege
command at ASA CLI). And allow some traffic from outside reach your internal
network. Used to be mandatory as older versions use nat to communicate any
interface.

B)Create a "identitary"nat proccess, from inside to outside. You "announce"
the same ip address using nat outside to create the "PIPE" of nat proccess.

If you are thinking to allow any traffic to your internal network you can do
it, but after that start to apply to other positions because you will be
fired from your actual job ;))

Hth
Robclav
robclavbcn.blogspot.com
www.kubsolutions.com

2010/10/21 sameer inam <i_sameer_at_hotmail.com>

> How do I allow my inside IP accessable from outside on ASA FW 5505 ? BTW my
> insde Ip is also Public Ip from ISP /29 subnet .please advice ?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Oct 21 2010 - 13:56:50 ART