Re: VOIP: corlist issue ?

I skipped through the config a bit fast and didn't see it on the ephone-dn.
I would agree that in theory this would work.

The problem I would see here is that I don't know if corlist outgoing was
ever fully utilized on a ephone-dn. 100% of the corlist implementations
I've seen on the ephone-dn is on the incoming corlist to adjust the outgoing
call, and not the incoming call to the phone.

I would play with it and apply the same corlist to an incoming dial peer to
a phone and see if that works. It may be a CME bug, but I wasn't able to
find any known issues.

Hope this helps a bit.

-nick

On Tue, Oct 19, 2010 at 9:44 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar>wrote:

> Nick,
> as far as I can tell, the example I sent has corlist at the ephone-dns.
> And I don't know how to apply it to the ephone. Would you please share
> a working config that would enable tennant like functionality ?
> I.e. phone 1 only rings phone 1 for a dn number that is also present
> in phone 2, and vice versa.
>
> Thanks,
> -Carlos
>
> Nick Matthews @ 19/10/2010 20:14 -0300 dixit:
> > You have to apply the corlist on the ephone (or ephone-dn) in order for
> > it to do anything. The 1st rule of corlist is..
> > Both the incoming and outgoing dial peer have to have a corlist
> > statement in order for any cor rule to take effect.
> >
> > -nick
> >
> >
> >
> > On Tue, Oct 19, 2010 at 12:05 PM, Carlos G Mendioroz <tron_at_huapi.ba.ar
> > <mailto:tron_at_huapi.ba.ar>> wrote:
> >
> > Well, as the call goes to a DN of a line, the (outgoing) dial-peer
> > is implicit (CME). The goal is to do tennant like functionality
> > and have phone-1 only see pod-1 dial-peers, and phone-2 only see
> > pod-2's.
> >
> > What I sent was a minimal example config showing the issue.
> > Nor inout nor ephone detail show any cor related info.
> > :(
> >
> >
> > Ryan West @ 19/10/2010 12:55 -0300 dixit:
> >
> > Carlos,
> >
> > Usually COR lists are applied outgoing on dial-peers and
> > incoming on DN's. You might try 'debug voip ccapi inout' and
> > 'debug ephone detail' to figure out the issue.
> >
> > -ryan
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com>
> > [mailto:nobody_at_groupstudy.com <mailto:nobody_at_groupstudy.com>] On
> > Behalf Of Carlos G Mendioroz
> > Sent: Tuesday, October 19, 2010 11:36 AM
> > To: Cisco certification
> > Subject: VOIP: corlist issue ?
> >
> > Hey there,
> > it might be me, but given this config:
> >
> > ...
> > dial-peer cor custom
> > name Pod-1
> > name Pod-2
> > !
> > !
> > dial-peer cor list Pod-1
> > member Pod-1
> > !
> > dial-peer cor list Pod-2
> > member Pod-2
> >
> > ...
> > ephone-dn 11
> > number 5551000
> > label Local
> > description PSTN-Phone-1
> > corlist incoming Pod-1
> > corlist outgoing Pod-1
> > !
> > !
> > ephone-dn 12
> > number 911
> > label Emergency
> > corlist incoming Pod-1
> > corlist outgoing Pod-1
> > !
> > !
> > ephone-dn 21
> > number 5551000
> > label Local
> > description PSTN-Phone-2
> > corlist incoming Pod-2
> > corlist outgoing Pod-2
> > !
> > !
> > ephone-dn 22
> > number 911
> > label Emergency
> > corlist incoming Pod-2
> > corlist outgoing Pod-2
> > !
> > !
> > ephone 1
> > device-security-mode none
> > description PSTN-Phone-1
> > mac-address 001D.45B5.FF33
> > type 7961
> > button 1:11 2:12
> > !
> > !
> > !
> > ephone 2
> > device-security-mode none
> > description PSTN-Phone-2
> > mac-address 001D.4595.B533
> > type 7961
> > button 1:21 2:22
> > ...
> >
> > If you pick phone-2 line 1 and you dial "911" it should ring
> > phone-2 line 2, ok ? But it rings phone-1.
> >
> > Any known issues with cor lists and CME ?
> > TIA,
> > -Carlos
> >
> >
> > --
> > Carlos G Mendioroz <tron_at_huapi.ba.ar <mailto:tron_at_huapi.ba.ar>>
> > LW7 EQI Argentina
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > Carlos G Mendioroz <tron_at_huapi.ba.ar <mailto:tron_at_huapi.ba.ar>>
> > LW7 EQI Argentina
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
> --
> Carlos G Mendioroz <tron_at_huapi.ba.ar> LW7 EQI Argentina

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 19 2010 - 22:41:29 ART