(no subject)

no idea what ports a Polycom uses, but,

try putting a log on the deny all statement and see what is left over

depending on your IOS you also have the capture command to see the ports
that might be needed, or RITE if you want to dump them to a packet capture,
say on wireshark

--
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
On Mon, Oct 11, 2010 at 7:15 AM, sameer inam <i_sameer_at_hotmail.com> wrote:
> Hello Experts,
> Im trying to test Video conference using the below configuration  .. I can
> hear the other person Voice but cant see the Video .. I m using Polycom ..
> could you please advice me Is any special ports require to open for Video
> ..
> Thanks for help
>
>
> access-list 102 permit tcp any any range 3230 3270access-list 102 permit
> udp
> any any range 3230 3253access-list 102 permit tcp any any eq 1720
>
> ip nat inside source static 10.0.3.x 178.135.x.x route-map TEST
> route-map TEST permit 20 match ip address 102 match interface
> fastethernet0/0
> interface fastethernet 0/0ip nat outside
> interface fasthernet 0/1 ip nat inside
>
> Kind regards,
> Sameer
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net