Re: Route Tagging with Default Route

Bob, that is very interesting, because it is probably exactly what I
am seeing, I just never saw the early debug that shows the tag being
added and then removed later.

Gary, myself and Bob are able to get at least some routes tagged, it
is the default that is the problem.

My config is as follows:

route-map OSPF2RIP permit 10
set tag 110

router rip
redistribute ospf 1 metric 5 route-map OSPF2RIP

I don't have the complete config because im at work at the moment.

On 7 October 2010 15:20, garry baker <baker.garry_at_gmail.com> wrote:
> yeah i miss read that...i thought you were going the other way...
>
> i tried this with a simple 3 router setup R1 <-> R2 <-> R3
>
> and i cannot get any tags on the OSPF2RIP routes when i redistribute with
> the route-map
>
> but the other way RIP2OSPF works like a charm with the tag keyword in ospf
>
> i am using Version 12.4(15)T14 on GNS3 for my lab
>
> what does your config look like?
>
> --
> Garry L. Baker
>
> "There is no 'patch' for stupidity." - www.sqlsecurity.com
>
>
> On Thu, Oct 7, 2010 at 9:01 AM, Muzammil Malick <malickmuz_at_gmail.com> wrote:
>>
>> Gary, not sure if I understand?
>>
>> the route is originated in OSPF using default-information-originate,
>> but the routes are not being tagged when they are redistributed into
>> RIP. Did you get this the wrong way round below or am I
>> misunderstanding you?
>>
>>
>>
>> On 7 October 2010 14:50, garry baker <baker.garry_at_gmail.com> wrote:
>> > if the route is originated by OSPF, then it will not be 'tagged' as RIP
>> > routes are sent into OSPF...
>> >
>> > is there a way to make the default a RIP route and see if the tag shows
>> > up
>> > after redistribution?
>> >
>> > --
>> > Garry L. Baker
>> >
>> > "There is no 'patch' for stupidity." - www.sqlsecurity.com
>> >
>> >
>> > On Thu, Oct 7, 2010 at 5:25 AM, Muzammil Malick <malickmuz_at_gmail.com>
>> > wrote:
>> >>
>> >> Hi Guys
>> >>
>> >> Hope someone can help me out.
>> >>
>> >> I am redistributing routes into RIP from OSPF. I have a route-map that
>> >> sets a tag on the routes as they are redistributed into RIP.
>> >> The problem is that all the routes seem to be tagged apart from the
>> >> default route. The default route which is originated in OSPF always
>> >> seems to have a tag of "0" when I debug RIP updates, however all the
>> >> other routes have the correct tag of "110"
>> >>
>> >> Any ideas?
>> >>
>> >> Thanks
>> >>
>> >>
>> >> Blogs and organic groups at http://www.ccie.net
>> >>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Oct 07 2010 - 15:29:43 ART