2010/9/28 =p=\ <jinjie69_at_gmail.com>
>
>
> 2010/9/28 Cisco certification <ccielab_at_groupstudy.com>
>
> Hi,
>>
>> You have tried to post to a GroupStudy.com certification mailing list.
>> Because
>> the server does not recognize you as a confirmed poster, you will be
>> required
>> to authenticate that you are using a valid e-mail address and are not a
>> spammer. By confirming this e-mail you certify that you are not sending
>> Unsolicited Bulk Email (UBE).
>>
>> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
>> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>>
>>
>> By confirming this e-mail you also certify the following:
>>
>> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>>
>> 2. The message is NOT designed to advertise a commercial product.
>>
>> 3. You understand all postings become property of GroupStudy.com
>>
>> 4. You have searched the archives prior to posting.
>>
>> 5. The message is NOT inflammatory.
>>
>> 6. The message is NOT a test message.
>>
>> To confirm, simply reply to this message. No editing is necessary. Once
>> confirmed, you will be able to post without additional confirmations.
>>
>>
>> Welcome to GroupStudy.com!
>>
>>
>> First time posters to GroupStudy.com are required to agree to the
>> GroupStudy terms and conditions.
>> Replying to this email, certifies you have read and agree to the
>> GroupStudy posting guidelines and terms and conditions.
>>
>> --- Original Message Follows ---
>>
>> Date: Tue, 28 Sep 2010 01:47:10 -0400
>> To: ccielab_at_groupstudy.com
>> From: <jinjie69_at_gmail.com>
>> Subject: A confused problem of link backup
>>
>> Hello, everyone, I'm a new guy to "groupstudy" with a very
>> confused problem, hopes any enthusiasts could give me a best
>> solutionso< now
>> here is ito<
>> We have a router with two interface (1,2) , interface 1 has access
>> with
>> ISP b Ab use IP:1.1.1.1; ISP A also gives us some Internet address like:
>> 2.2.2.0/24, these Internet addres is used for corporation users which
>> has
>> VPN's requirement, means they can't not be change frequently. There is
>> also 300
>> personal user use private address and PPPoE to get on the internet.
>> Now we want to use ISP B and interface 2 to give our network a
>> backup,
>> interface 2 use IP:3.3.3.3, there is also some Internet address
>> like:4.4.4.0/24.
>> How could I config the router to meet our goal.Private user is
>> easy
>> to adapt the change through PBR, but what about the corporation users,
>> ####Can
>> they cut-over to ISP B with ISP A's Internet address??????
>> I am a Chinese man, so english is not very good, but I hope there
>> is
>> some guy could give me the most nearest perfect solution.Thanks a lot!
Blogs and organic groups at http://www.ccie.net
Received on Tue Sep 28 2010 - 14:28:15 ART
This archive was generated by hypermail 2.2.0 : Fri Oct 01 2010 - 05:58:06 ART