RE: Removing 3750 from stack?

You have to remove the switch from the configuration that you want to
remove from the stack.

No switch # provision "model"

That will remove the switchports from the configuration, then you can
unplug the switch.

On the switch that you removed, wiped it and reconfigure it for another
purpose.

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Jason Aarons (US)
Sent: Wednesday, September 15, 2010 9:26 AM
To: ccielab_at_groupstudy.com
Subject: Removing 3750 from stack?

I have a two 3750s connected via Stackwise cable managed with 1 ip
address, I
need to separate them and make them each standalone, is there anything
special
I have to do ? -jason

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated
addressee(s) named above only. If you are not the
intended addressee, you are
hereby notified that you have received
this communication in error and that
any use or reproduction of
this email or its contents is strictly prohibited
and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your
computer. Thank you.

Blogs and organic groups at http://www.ccie.net
Received on Wed Sep 15 2010 - 09:37:43 ART