RE: etherchannel problem

It all depends on the system. Some will some won't. If you hardcode the
etherchannel to on and put a port analyzer between there you will still see
PaGP frames traversing the link. Test it out.

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Managing Partner / Sr. Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com

-----Original Message-----
From: GAURAV MADAN [mailto:gauravmadan1177_at_gmail.com]
Sent: Tuesday, August 31, 2010 1:40 PM
To: Tyson Scott
Cc: Mustafa Yadav; Cisco certification
Subject: Re: etherchannel problem

I dont see such a problem in my switch .. How is this Normal ?

Gaurav Madan

On Tue, Aug 31, 2010 at 9:54 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:
> That is not a bug or a problem. That is normal.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Mustafa Yadav
> Sent: Tuesday, August 31, 2010 12:12 PM
> To: Cisco certification
> Subject: etherchannel problem
>
> Hi Guys,
>
>
> As you see below even channel group configured as mode on it is shown
 as
> protocol pagp.What would be root cause for this?
>
>
> sh run int g1/23
> Building configuration...
>
> Current configuration : 722 bytes
> !
> interface GigabitEthernet1/23
> switchport
> switchport trunk encapsulation dot1q
> switchport mode trunk
> carrier-delay msec 0
> mls qos trust dscp
> spanning-tree link-type point-to-point
> channel-group 2 mode on
> end
>
> sh etherchannel summary
> Flags: D - down P - bundled in port-channel
> I - stand-alone s - suspended
> H - Hot-standby (LACP only)
> R - Layer3 S - Layer2
> U - in use f - failed to allocate aggregator
>
> M - not in use, minimum links not met
> u - unsuitable for bundling
> w - waiting to be aggregated
> d - default port
>
>
> Number of channel-groups in use: 1
> Number of aggregators: 1
>
> Group Port-channel Protocol Ports
>
------+-------------+-----------+-------------------------------------------
> ----
> 2 Po2(SU) PAgP Gi1/23(P)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 31 2010 - 13:48:15 ART