Re: OT: filtering Show Outputs

Hello Tysson,

Thanks alot. It worked for up to the first 9 listings. I tried modifying the
command for listings beyond the first 9 then the output became different. I
guess I should now be talking about knowing more on filters. I will
appreciate if you can mail me the url for the EEM configuration guide.

Thank you.

On Tue, Aug 31, 2010 at 1:46 AM, Tyson Scott <tscott_at_ipexpert.com> wrote:

> The following comes right from the EEM configuration guide. Just a slight
> modification on the show command
>
> event manager applet snmpcpuge75
> event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 get-type exact entry-op ge
> entry-val 75
> poll-interval 10
> action 1.0 cli command "enable"
> action 2.0 cli command "show process cpu | incl ^ [1-5]"
> action 3.0 mail server "192.168.1.146" to "engineer_at_cisco.com" from
> "devtest_at_cisco.com"
> subject "B25 PBX Alert" body "$_cli_result"
>
> the incl ^ [1-5] will make sure you only get the first 5 process listings.
>
> For your memory question it would be very similar but you would have to
> look
> up the SNMP OID For memory usage and the command would be as follows.
>
> show process memory | incl ^ [0-2]
>
> make sure you have the ^ (carat) and three spaces so you can capture the
> PID
> of the first 5 processes.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Tolulope Ogunsina
> Sent: Monday, August 30, 2010 11:40 AM
> To: olumayokun fowowe; Yemi Oshunkoya
> Cc: ccielab_at_groupstudy.com
> Subject: Re: OT: filtering Show Outputs
>
> Try Tcl/EEM.
>
>
> Best Regards, Tolulope Ogunsina, CCIE x2 (R&S|Sec)
>
> -----Original Message-----
> From: olumayokun fowowe <olumayokun_at_gmail.com>
> Sender: nobody_at_groupstudy.com
> Date: Mon, 30 Aug 2010 16:37:45
> To: Yemi Oshunkoya<yzmar4real_at_hotmail.com>
> Reply-To: olumayokun fowowe <olumayokun_at_gmail.com>
> Cc: <ccielab_at_groupstudy.com>
> Subject: Re: OT: filtering Show Outputs
>
> Hello all,
>
> Please let me make myself a bit clearer:
>
> suppose i issue the command "show processes memory" and I want to filter
> the
> output to show the first 5 lines of the output. How do I filter such.
>
> Thanks,
>
> On Mon, Aug 30, 2010 at 4:33 PM, Yemi Oshunkoya
> <yzmar4real_at_hotmail.com>wrote:
>
> > it generally depends on what you want to see.
> >
> > i usually "pipe" it
> >
> > show run | sec router
> > show run | include ip route
> >
> > e.t.c
> >
> > HTH
> >
> > > Date: Mon, 30 Aug 2010 16:30:05 +0100
> > > Subject: OT: filtering Show Outputs
> > > From: olumayokun_at_gmail.com
> > > To: ccielab_at_groupstudy.com
> > >
> > > Hello Guys,
> > >
> > > How can i filter my show commands to feature certain number of lines in
> > > cisco devices.
> > >
> > > Thank you.
> > >
> > > --
> > > Olumayokun Fowowe
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Olumayokun Fowowe
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>

-- 
Olumayokun Fowowe
Blogs and organic groups at http://www.ccie.net