Re: DENIED due to: extended community not supported

Manoucher,

More tha likely in our case there is not "import" for that particular RT on
that box. If you want these updates to be kept (seen/fw'd) anyway (even
without a corresponding VRF with the right import command), you need to
configure "no bgp default route-target filter" under the BGP process.
Just as discussed multiple times recently be very careful as this command
should be used with caution in production networks. You can use this command
in some cases like when configuring a pure (PE not facing CE) ASBR - but no
need to configure when you're on a route reflector.

Kambiz Agahian
CCIE Instructor/Consultant
M.Eng Telecom, CCIE# 25341, CCSI# 33326, MCSE, MCSA
On Fri, Aug 27, 2010 at 8:48 AM, Manouchehr Omari
<manouchehr1979_at_gmail.com>wrote:

> Dears,
>
> I have the following configured,
>
> address-family vpnv4
> neighbor 150.7.6.6 activate
> neighbor 150.7.6.6 send-community extended
> exit-address-family
>
> but when i debug i get "*192.168.6.0/24 - DENIED due to: extended
> community
> not supported*" does it mean that IOS does not support?
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 27 2010 - 09:02:38 ART