Re: Dynamips With 3560 Switches

What is the model of the breakout switch?

--Hammer--

On 8/25/2010 1:25 PM, Anbu wrote:
> Hi
> I have tried to connect the 3560 switches with Dynamips with the help of
> some old mails in this group.But It is not working . So i need help to make
> it success.
>
> * The Connectivity is*
>
> Dynamips SVR -------------0/15 Breakout_SW 0/1---------------0/1 3560_SW
> Breakout_Sw 0/15 = Trunk Port
> Breakout_Sw 0/1 = Access Port (Vlan101) = Connected to the 3560 Switch.
>
>
> *The issues i am facing is.*
> I can see the 3560 Switches as well as Dynamips Routers from breakout
> switch by CDP.
> 3560 switches also can see the breakout switch , but Dynamips Routers
> cannot see even
> the Breakout switch by CDP.
> I have configured the Dynamips Routers with interface ip and
> created same vlan in the switch , i cannot ping that also from the
> Dynamips Router.
> got the encapsulation failed message in the debug when pinging.
>
> All the Vlans i have used in the .Net files are created in the breakout
> switch.
>
>
> *The .Net file i have used is:*
>
>
> ##################################################
> #
> # Define global router parameters for instance 1
> #
> ##################################################
>
> autostart=false
> [localhost:7200]
>
> workingdir = D:\DYN-V5\DYN3560\working
>
> [[3640]]
> #
> # Specify 3640 IOS image on Windows here:
> #image = C:\Program
> Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.extracted.bin
> #
> # Specify 3640 IOS image on Linux here:
> image = C:\Program Files\Dynamips\images\c3640-ik9o3s-mz.124-13a.bin
> #
> ram = 128
> disk0 = 0
> disk1 = 0
> # Choose an idlepc value from the below
> idlepc = 0x60562348
> # idlepc = 0x60530870
> # idlepc = 0x60530890
> # idlepc = 0x60530a58
> # idlepc = 0x60530abc
> # idlepc = 0x605310c4
> # idlepc = 0x605e92e8
> # idlepc = 0x605e9364
> # idlepc = 0x60531394
> # idlepc = 0x605313d0
> # idlepc = 0x605313ec
> mmap = true
> ghostios = true
>
> ###########################
> #
> # Define router instances
> #
> ###########################
>
> [[Router R1]]
> model = 3640
> autostart = false
> slot0 = NM-1FE-TX
> slot1 = NM-4T
> F0/0 = SW1 1
> S1/0 = FRSW 1
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R1.initial.config.txt
>
> [[Router R2]]
> model = 3640
> autostart = false
> slot0 = NM-1FE-TX
> slot1 = NM-4T
> F0/0 = SW1 2
> S1/0 = FRSW 2
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R2.initial.config.txt
>
> [[Router R3]]
> model = 3640
> autostart = false
> slot0 = NM-4E
> slot1 = NM-4T
> S1/0 = FRSW 3
> S1/1 = FRSW 13
> S1/2 = R1 S1/1
> S1/3 = R2 S1/1
> E0/0 = SW1 3
> E0/1 = SW1 9
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R3.initial.config.txt
>
> [[Router R4]]
> model = 3640
> autostart = false
> slot0 = NM-4E
> slot1 = NM-4T
> E0/0 = SW1 4
> E0/1 = SW1 10
> S1/0 = FRSW 4
> S1/1 = R5 S1/1
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R4.initial.config.txt
>
> [[Router R5]]
> model = 3640
> autostart = false
> slot0 = NM-4E
> slot1 = NM-4T
> E0/0 = SW1 5
> E0/1 = SW1 11
> S1/0 = FRSW 5
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R5.initial.config.txt
>
> [[Router R6]]
> model = 3640
> autostart = false
> slot0 = NM-4E
> slot1 = NM-4T
> E0/0 = SW1 6
> E0/1 = SW1 12
> S1/0 = FRSW 6
> cnfg = D:\DYN-V5\DYN3560\initial.configs\R6.initial.config.txt
>
> [[ETHSW SW1]]
> 1 = access 101
> 2 = access 102
> 3 = access 103
> 4 = access 104
> 5 = access 105
> 6 = access 106
> #7 = access 201
> #8 = access 202
> # 9 = access 203
> # 10 = access 204
> # 11 = access 205
> # 12 = access 206
> # 13 = access 224
> # 14 = access 124
> 15 = dot1q 1 NIO_gen_eth:\Device\NPF_{C8855A60-B7CC-4516-99F6-2630AB2E8DB8}
>
>
> ##################################################
> #
> # Define global router parameters for instance 2
> #
> ##################################################
>
> [localhost:7201] # Talk to the 2nd dynamips process on port 7201
> udp = 11000 # Change the base udp port to 11000 (the default is 10000)
>
> workingdir = D:\DYN-V5\DYN3560/working
>
> [[3640]]
> #
> # Specify 3640 IOS image on Windows here:
> #image = C:\Program
> Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.extracted.bin
> #
> # Specify 3640 IOS image on Linux here:
> image = C:\Program Files\Dynamips\images\c3640-ik9o3s-mz.124-13a.bin
> #
> ram = 128
> disk0 = 0
> disk1 = 0
> # Choose an idlepc value from the below
> idlepc = 0x60530870
> # idlepc = 0x60530890
> # idlepc = 0x60530a58
> # idlepc = 0x60530abc
> # idlepc = 0x605310c4
> # idlepc = 0x605e92e8
> # idlepc = 0x605e9364
> # idlepc = 0x60531394
> # idlepc = 0x605313d0
> # idlepc = 0x605313ec
> mmap = true
> ghostios = true
>
>
> ###########################
> #
> # Define router instances
> #
> ###########################
>
>
> [[Router BB1]]
> model = 3640
> console = 2008
> autostart = false
> slot1 = NM-4T
> S1/0 = BB3 S1/0
> S1/1 = FRSW 21
> cnfg = D:\DYN-V5\DYN3560\initial.configs\BB1.initial.config.txt
>
> [[Router BB2]]
> model = 3640
> console = 2009
> autostart = false
> slot0 = NM-4E
> E0/0 = SW1 13
> cnfg = D:\DYN-V5\DYN3560\initial.configs\BB2.initial.config.txt
>
> [[Router BB3]]
> model = 3640
> console = 2010
> autostart = false
> slot0 = NM-4E
> slot1 = NM-4T
> E0/0 = SW1 14
> cnfg = D:\DYN-V5\DYN3560\initial.configs\BB3.initial.config.txt
>
> [[FRSW FRSW]]
>
> # R1 to FRSW
> 1:102 = 2:201
> 1:103 = 3:301
> 1:113 = 13:311
> 1:104 = 4:401
> 1:105 = 5:501
>
> # R2 to FRSW
> 2:203 = 3:302
> 2:213 = 13:312
> 2:204 = 4:402
> 2:205 = 5:502
>
> # R3 to FRSW
> 3:304 = 4:403
> 3:305 = 5:503
> 13:314 = 4:413
> 13:315 = 5:513
>
> # R4 to FRSW
> 4:405 = 5:504
>
> # R6 to FRSW
> 6:51 = 21:51
> 6:100 = 21:100
> 6:101 = 21:101
> 6:201 = 21:201
> 6:301 = 21:301
> 6:401 = 21:401
>
>
>
> Can anyone help me to solve this.
>
>
> Regards,
> Anbu
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 25 2010 - 13:39:51 ART