Re: Fun with Frame Relay.

That is exactly how I was going to reply but Narbik sent it before I could hit
send...

:)

On Aug 16, 2010, at 5:14 PM, Narbik Kocharians wrote:

> James,
>
> By default, frame-relay routers generate LMI Status inquiries every 10
seconds, and a full status inquiry every 6th cycle (Every 60 seconds or every
n391 cycle). The interval for status inquiries can be changed using the
Keepalive interface configuration command, whereas, the Frame-relay
lmi-n391dte command can be used to change the interval for the complete
status inquiries.
>
> Check the output of the following debug command, it shows the status
inquiries and full status inquiries:
>
> On R2
>
> R2#Debug frame lmi
>
> *Nov 24 19:59:57.407: Serial0/0(out): StEnq, myseq 125, yourseen 124, DTE
up
> *Nov 24 19:59:57.407: datagramstart = 0x3F401ED4, datagramsize = 14
> *Nov 24 19:59:57.407: FR encap = 0x00010308
> *Nov 24 19:59:57.407: 00 75 95 01 01 01 03 02 7D 7C
>
> *Nov 24 19:59:57.411: Serial0/0(in): Status, myseq 125, pak size 14
> *Nov 24 19:59:57.411: RT IE 1, length 1, type 1
> *Nov 24 19:59:57.411: KA IE 3, length 2, yourseq 125, myseq 125
>
>
> *Nov 24 20:00:07.407: Serial0/0(out): StEnq, myseq 126, yourseen 125, DTE
up
> *Nov 24 20:00:07.407: datagramstart = 0x3F6B0294, datagramsize = 14
> *Nov 24 20:00:07.407: FR encap = 0x00010308
> *Nov 24 20:00:07.407: 00 75 95 01 01 01 03 02 7E 7D
>
> *Nov 24 20:00:07.411: Serial0/0(in): Status, myseq 126, pak size 14
> *Nov 24 20:00:07.411: RT IE 1, length 1, type 1
> *Nov 24 20:00:07.411: KA IE 3, length 2, yourseq 126, myseq 126
>
> *Nov 24 20:00:17.407: Serial0/0(out): StEnq, myseq 127, yourseen 126, DTE
up
> *Nov 24 20:00:17.407: datagramstart = 0x3F400C14, datagramsize = 14
> *Nov 24 20:00:17.407: FR encap = 0x00010308
> *Nov 24 20:00:17.407: 00 75 95 01 01 01 03 02 7F 7E
> *Nov 24 20:00:17.407:
> *Nov 24 20:00:17.411: Serial0/0(in): Status, myseq 127, pak size 14
> *Nov 24 20:00:17.411: RT IE 1, length 1, type 1
> *Nov 24 20:00:17.411: KA IE 3, length 2, yourseq 127, myseq 127
>
> *Nov 24 20:00:27.407: Serial0/0(out): StEnq, myseq 128, yourseen 127, DTE
up
> *Nov 24 20:00:27.407: datagramstart = 0x3F6AF394, datagramsize = 14
> *Nov 24 20:00:27.407: FR encap = 0x00010308
> *Nov 24 20:00:27.407: 00 75 95 01 01 01 03 02 80 7F
> *Nov 24 20:00:27.407:
> *Nov 24 20:00:27.411: Serial0/0(in): Status, myseq 128, pak size 14
> *Nov 24 20:00:27.411: RT IE 1, length 1, type 1
> *Nov 24 20:00:27.411: KA IE 3, length 2, yourseq 128, myseq 128
>
> *Nov 24 20:00:37.407: Serial0/0(out): StEnq, myseq 129, yourseen 128, DTE
up
> *Nov 24 20:00:37.407: datagramstart = 0x3F644ED4, datagramsize = 14
>
> *Nov 24 20:00:37.407: FR encap = 0x00010308
> *Nov 24 20:00:37.407: 00 75 95 01 01 01 03 02 81 80
> *Nov 24 20:00:37.407:
> *Nov 24 20:00:37.411: Serial0/0(in): Status, myseq 129, pak size 14
> *Nov 24 20:00:37.411: RT IE 1, length 1, type 1
> *Nov 24 20:00:37.411: KA IE 3, length 2, yourseq 129, myseq 129
>
> *Nov 24 20:00:47.407: Serial0/0(out): StEnq, myseq 130, yourseen 129, DTE
up
> *Nov 24 20:00:47.407: datagramstart = 0x3F6B03D4, datagramsize = 14
> *Nov 24 20:00:47.407: FR encap = 0x00010308
> *Nov 24 20:00:47.407: 00 75 95 01 01 00 03 02 82 81
>
> *Nov 24 20:00:47.419: Serial0/0(in): Status, myseq 130, pak size 59
> *Nov 24 20:00:47.419: RT IE 1, length 1, type 0
> *Nov 24 20:00:47.419: KA IE 3, length 2, yourseq 130, myseq 130
>
> *Nov 24 20:00:47.419: PVC IE 0x7 , length 0x3 , dlci 102, status 0x2
> *Nov 24 20:00:47.419: PVC IE 0x7 , length 0x3 , dlci 103, status 0x2
> *Nov 24 20:00:47.419: PVC IE 0x7 , length 0x3 , dlci 104, status 0x2
> *Nov 24 20:00:47.419: PVC IE 0x7 , length 0x3 , dlci 105, status 0x0
> *Nov 24 20:00:47.419: PVC IE 0x7 , length 0x3 , dlci 106, status 0x0
>
> Note the status inquiries are sent every 10 seconds, these messages are
type 1s, whereas, the complete status inquiries are generated by the local
router every 6th cycle, these message are type 0 messages, and when the
frame-relay switch receives these messages it responds with all the DLCIs that
are configured for that given router.
>
> Now....as long as you understand this process, no matter how the question is
asked, you will be fine with it. A nasty one will ask you to change the
interval of Type 0 messages.
>
> On Mon, Aug 16, 2010 at 1:34 PM, Adrian Brayton <abrayton_at_gmail.com> wrote:
> If I remember the task correctly, it is looking for a full status update
which occur's every 60 seconds... So you might see something in reference to
make sure that every 6th update occurs in this amount of time or something in
that regard!
>
>
> On Aug 16, 2010, at 3:13 PM, Poplawski, James wrote:
>
> > Good afternoon,
> >
> > I'm currently working through Narbik's Advanced CCIE Routing & Switching
Workbook and have a question on the frame-relay lmi-n391dte 3 command. The
lmi-n391dte command in particular. In the exam how am I to determine which
command is needed?
> >
> > lmi-n391dte set full status polling counter
> > lmi-n392dce LMI error threshold
> > lmi-n392dte LMI error threshold
> > lmi-n393dce set LMI monitored event count
> > lmi-n393dte set LMI monitored event count
> > lmi-t392dce set DCE polling verification timer
> > lmi-type Use CISCO-ANSI-CCITT type LMI
> >
> > How does one decipher which command is needed and when? I want to be an
expert on Frame Relay, how do I get there?
> > JB
> >
> > This transmission contains information for the exclusive use of the
intended recipient and may be privileged, confidential and/or otherwise
protected from disclosure. Any unauthorized review or distribution is
strictly prohibited. Our company is required to retain electronic mail
messages, which may be produced at the request of regulators or in connection
with litigation. Electronic messages cannot be guaranteed to be secure, timely
or error-free. As such, we recommend that you do not send confidential
information to us via electronic mail. This communication is for informational
purposes only and is not an offer or solicitation to buy or sell any
investment product. Any information regarding specific investment products is
subject to change without notice. If you received this transmission in error,
please notify the sender immediately by return e-mail and delete this message
and any attachments from your system.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
>
> --
> Narbik Kocharians
> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining.com
> Sr. Technical Instructor
> YES! We take Cisco Learning Credits!
> Training And Remote Racks available

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 16 2010 - 17:18:43 ART