Re: Limit output

Very true.

Kambiz Agahian

CCIE Instructor/Consultant
M.Eng Telecom, CCIE# 25341, CCSI# 33326, MCSE, MCSA

On Sun, Aug 15, 2010 at 10:50 AM, Nick Matthews <matthn_at_gmail.com> wrote:

> For instance, on a CME, if you want to display a particular ephone or
> ephone-dn, you can use:
>
> show run | s ephone 30
> show run | s ephone-dn 30
>
> what you have to realize is that the CME developers put two spaces between
> the ephone/ephone-dn and the number. As well, the regular expressions are
> case-sensitive so you have to watch out for that. If you're still doing a
> 'show run' you're a sucker. Get good with include and section commands and
> you'll fly.
>
> -nick
>
>
> On Sat, Aug 14, 2010 at 9:19 PM, Kambiz Agahian <aussiecert_at_gmail.com>wrote:
>
>> Guys,
>>
>> This sounds pretty cool but you can not use this as a general golden
>> formula for everything.
>>
>> Please bear in mind that the output of some IOS commands may need some
>> modifications in this string. In many cases even a single "space" in the
>> output should be taken into consideration and can easily change the way you
>> develop your regexp.
>>
>> Kambiz Agahian
>>
>> CCIE Instructor/Consultant
>> M.Eng Telecom, CCIE# 25341, CCSI# 33326, MCSE, MCSA
>>
>>
>>
>>
>>
>> On Fri, Aug 13, 2010 at 1:21 AM, SIVA <siva0111_at_gmail.com> wrote:
>>
>>> This is really gr8 information.
>>>
>>> Siva
>>> IT Analyst
>>> TCS
>>> 9553551054
>>>
>>>
>>> On Fri, Aug 13, 2010 at 12:51 AM, Muzammil Malick <malickmuz_at_gmail.com
>>> >wrote:
>>>
>>> > Thanks guys
>>> >
>>> > I had never seen the linenum command!
>>> >
>>> > On 12 August 2010 20:17, Nick Matthews <matthn_at_gmail.com> wrote:
>>> > > True, mistake on my part. I just get so excited around regular
>>> > expressions.
>>> > >
>>> > > If you really wanted to nickpick it would look like:
>>> > > sh run linenum | include ( [1-5]?[0-9] : )
>>> > >
>>> > >
>>> > > -nick
>>> > >
>>> > > On Thu, Aug 12, 2010 at 11:57 AM, Ryan West <rwest_at_zyedge.com>
>>> wrote:
>>> > >>
>>> > >> Nick,
>>> > >>
>>> > >> > -----Original Message-----
>>> > >> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
>>> > >> > Behalf Of Nick Matthews
>>> > >> > Sent: Thursday, August 12, 2010 11:37 AM
>>> > >> >
>>> > >> > This is a little more scalable:
>>> > >> >
>>> > >> > R1#sh run linenum | include ( [1-2] : )
>>> > >> >
>>> > >> > for example this would be 50 lines:
>>> > >> >
>>> > >> > R1#sh run linenum | include ( 5. : )
>>> > >> >
>>> > >>
>>> > >> Not to nitpick too much, but the second example will show lines
>>> 50-59,
>>> > if
>>> > >> you want to show 1-59 I think you would need an ? statement.
>>> > >>
>>> > >> sh run linenum | include ( [1-5]?. : )
>>> > >>
>>> > >> -ryan
>>> >
>>> >
>>> > Blogs and organic groups at http://www.ccie.net
>>> >
>>> > _______________________________________________________________________
>>> > Subscription information may be found at:
>>> > http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 15 2010 - 14:45:48 ART