RES: Frame Relay Interface Configuration problem

Sorry. Let me rephrase.

2.1 - Frame Relay Hub&Spoke
 - Configure frame realy between R1, R3 and R5, using R3 as Hub
 - All configurations should be done on the physical interface
 - The connection between R1 and R3 must use the 20.10.13.0/24 network
 - The connection between R5 and R3 must use the 20.10.35.0/24 network
 - Do not use secondary ip addresses on R3

So, on R3 we have one interface, two IP addresses and two PCVs. I cannot use
neither secondary addresses nor subinterfaces.

Hope I clarified.

MR

De: masroor ali [mailto:masror.ali_at_gmail.com]
Enviada em: terga-feira, 10 de agosto de 2010 11:09
Para: Marcelo Rosa; Cisco certification
Assunto: Re: Frame Relay Interface Configuration problem

i could not understand your question bro,
On Tue, Aug 10, 2010 at 6:47 PM, Marcelo Rosa
<MRosa_at_multirede.com.br<mailto:MRosa_at_multirede.com.br>> wrote:
The question states:
Configure FR between R1, R3 and R5
PVCs are as follow: R1-R3 (103-301) and R3-R5 (305-503)

Link between R1 and R3 should use network 20.10.13.0/24<http://20.10.13.0/24>
Link between R5 and R3 should use network 20.10.35.0/24<http://20.10.35.0/24>

Configuration only in the Physical interfaces. No secondary ip addresses
allowed.

I4m stuck. As far as I know there4s no way to solve this. Am I wrong?

Thks,

MR

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 10 2010 - 11:23:33 ART